Back to Dream Bikes
PK Ripper – Polished (2015)
$1,250.00
This bike started life as a (NOS) 2015 PK Ripper Frame Set. We then chose to add Blue Components. Some key components on this one are 3 Piece SE Cranks & Sealed Bearing SE Wheels.
This Bike has Sold!
| Frame | 2015 “Polished” PK Ripper Looptail |
| Fork | Landing Gear |
| Headset 1 1/8 | SE Racing – Blue Anodized |
| Stem | SE Racing – Silver 55mm |
| Handle Bars | SE Racing |
| Grips | AME – Blue |
| Stem Bolts | Shadow Hollow Bolt Kit (Blue) |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing Spider / Pork Chop Chain Ring |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro |
| Brake Pads | ProMax |
| Brake Cable | MCS Lightning |
| Brake Lever | Tektro |
| Seat | SE Racing – Blitz |
| Seat Clamp | SE Racing – Silver |
| Seat Post | Blue / Silver Fluted |
| Wheels | SE Racing – Sealed Bearing |
| Tires | Blue Snake Belly |
| Tubes | BMX Guru |
| Freewheel | Basic 16th |
| Chain | KMS S1 |
| Chain Tensioners | Optional |
| Axle Nuts | MCS – Blue Anodized |
| Valve Caps | Box One – Blue Anodized |
| Sticker Set | P.K. Ripper – Blue |
| Pad Set | SE Racing |
.
.
.
Out of stock
Related products
PK Ripper – Vans Edition (2021)
This Bike has Sold!
2021 Vans Edition PK Ripper - This one is 100% stock the way they come from SE Racing. Only 1 of these available. 1 of 250 made for the U.S. Market!
.
.
.
[gallery ids="2818,2825,2824,2823,2822,2821,2820,2819"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | "Off the Wall" Landing Gear |
| Headset 1 1/8 | SE Racing – Red Anodized |
| Stem 1 /18” | SE Racing – Black Anodized 55mm (Vans Edition) |
| Handle Bars | SE Racing Cro Moly |
| Grips | Vans X Cult Grips |
| Cranks | SE Racing 3 Piece |
| Sprocket | SE Racing 44 tooth |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 V Brakes |
| Brake Pads | Tektro |
| Brake Cable | Tektro Slick Cable |
| Brake Lever | Tektro 316A - Alloy |
| Seat | SE Racing |
| Seat Clamp | SE Racing Champ Clamp – Red Anodized |
| Seat Post | SE Racing - Fluted |
| Wheels | SE Racing Double Wall with Seal Bearing Mohawk Hubs |
| Tires | Vans X Cult |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Pad Set | Vans "Off the Wall" Checkerboard Edition |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |
GT Speed Series “Team” (1998)
1998 GT Speed Series "Team"
. This Bike started as a used 1998 Frame that I purchased off of E-Bay. I then wet sanded the frame and polished it to look like new again. A host of high end parts were added to finish off the build . . . GT Cranks & Cook Brothers Brakes to name a few. All of the parts are brand new, the frame is a 98 Speed Series "Team" model and as mentioned it is "used" and does have some scuffs/scratches that didn't polish out. Overall it looks great but I do want to stress it is a used 1998 Frame! Please Note: 1998 Decal Sets are not currently available so it has the 1997 Decals . . . (It is a 1998 Frame though as confirmed by the Serial #)| Frame | 1998 GT Speed Series "Team" |
| Fork | GT Cro Moly |
| Handle Bars | Shadow Conspiracy Vultus SG |
| Stem | Profile |
| Headset | SE Racing "Eluder" |
| Grips | AME Unitron |
| Cranks | GT 3 Piece |
| Sprocket | GT Overdrive (OG) |
| B.B. & Cups | Stolen Revolver 19mm |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Cook Brothers |
| Brake Pads | Cook Brothers |
| Brake Cable | Cook Brothers |
| Seat | MCS |
| Seat Clamp | Built In |
| Seat Post | Kalloy 26.8 |
| Wheels | SE Racing Sealed Bearing (Mohawk Hubs) |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ROS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold |
| Valve Caps | Punisher Gold Alloy |
| Decal Set | 1997 GT Speed Series “Team” |
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. (Not installed during the photo shoot) The Oakley's will be packed with care for the future owner. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! This bike isn't currently for sale but if you're really - really interested you can contact me and we'll see if I'm ready to sell it yet. All of the original parts as well as the Haro Sunglasses will be included in the sale at some point . . . I kept ALL of the original packing material and took good photos of where everything goes in the event it does sell someday. If you're interested in this bike you can contact me to see if I'm interested in selling it . . . . I can't keep all of them so it will sell at some point. . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
PK Ripper – Vans “Euro” Edition – Frame # 500! (2021)
Vans PK Ripper - Frame # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. Frame # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not currently installed) Note: US Models did not receive the Front Brake. This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Frame Number | 500 |