Back to Dream Bikes
PK Ripper – Polished (2015)
$1,250.00
This bike started life as a (NOS) 2015 PK Ripper Frame Set. We then chose to add Blue Components. Some key components on this one are 3 Piece SE Cranks & Sealed Bearing SE Wheels.
This Bike has Sold!
| Frame | 2015 “Polished” PK Ripper Looptail |
| Fork | Landing Gear |
| Headset 1 1/8 | SE Racing – Blue Anodized |
| Stem | SE Racing – Silver 55mm |
| Handle Bars | SE Racing |
| Grips | AME – Blue |
| Stem Bolts | Shadow Hollow Bolt Kit (Blue) |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing Spider / Pork Chop Chain Ring |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro |
| Brake Pads | ProMax |
| Brake Cable | MCS Lightning |
| Brake Lever | Tektro |
| Seat | SE Racing – Blitz |
| Seat Clamp | SE Racing – Silver |
| Seat Post | Blue / Silver Fluted |
| Wheels | SE Racing – Sealed Bearing |
| Tires | Blue Snake Belly |
| Tubes | BMX Guru |
| Freewheel | Basic 16th |
| Chain | KMS S1 |
| Chain Tensioners | Optional |
| Axle Nuts | MCS – Blue Anodized |
| Valve Caps | Box One – Blue Anodized |
| Sticker Set | P.K. Ripper – Blue |
| Pad Set | SE Racing |
.
.
.
Out of stock
Related products
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. (Not installed during the photo shoot) The Oakley's will be packed with care for the future owner. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! This bike isn't currently for sale but if you're really - really interested you can contact me and we'll see if I'm ready to sell it yet. All of the original parts as well as the Haro Sunglasses will be included in the sale at some point . . . I kept ALL of the original packing material and took good photos of where everything goes in the event it does sell someday. If you're interested in this bike you can contact me to see if I'm interested in selling it . . . . I can't keep all of them so it will sell at some point. . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
Skyway T/A-20 – Candy Chrome Blue (2022)
This build is based off of the Candy Chrome Blue Skyway Frames that Planet BMX released. These are Beautiful Frames and very hard to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Graphite Skyway Tuff Wheels and 60th Anniversary Skyway Pedals! This one has sold but we have another one "in the works". Call if interested.
This Bike has SOLD. If this bike is of interest to you we may be able to build one for you. (Depending on current inventory)
.
.
.
[gallery ids="2734,2735,2736,2737,2738,2739"]
| Frame | Skyway T/A Pro XL - Candy Chrome Blue |
| Fork | Skyway T/A Pro - Candy Chrome Blue |
| Headset 1 1/8 | HARO Sealed Bearings |
| Stem | HARO Lineage - 52mm |
| Handle Bars | HARO |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks 175mm |
| Sprocket | Neptune 44th |
| B.B.– Euro | MCS |
| Pedals | Skyway 60th Anniversary |
| Brakes | Box 3 Pro |
| Brake Pads | Kool Stop |
| Brake Cable | Box 3 |
| Seat | MCS “Expert” (Black N Blue) |
| Seat Clamp | HARO Baseline |
| Seat Post | MCS 350mm |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Axle Nuts | TNT Alloy – Black |
| Axle Washers | SE Racing |
| Valve Caps | Box Alloy Blue Anodized |
| Headset Top Cap | FSA |
| Pad Set | Skyway |
Torker Pro XL (1998)
1998 Torker Pro XL - USA Made
This Bike started as a used ALUMINUM Torker Frame that I purchased off of E-Bay. (These are SUPER hard to Frames to find) The frame was advertised as a 1999 model but after some research I believe it to be a 1998 model. (I'm not 100% sure) A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Skyway Graphite Tuff Wheels & Box Brakes to name a few. All of the parts are brand new however the frame is a 98/99 “Pro XL” model and as mentioned it is “used” and does have some scuffs/scratches but overall it looks great but I do want to stress it is a used Frame! . Disclaimer, I'm not sure how many years Torker made these Aluminum Frames but I don't believe it was many. With that being said I believe this is a 1998 or 1999 model. . Note: As with all of our bikes I am open to some parts swapping to either fit your needs or in some cases lower the overall price! . .| Frame | Torker Pro XL (Aluminum) |
| Fork | Torker Cro Moly |
| Handle Bars | Cro Moly |
| Stem | Torker 6 Bolt |
| Headset | SE Racing |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | SE Racing Spider / Guru Sprocket |
| B.B. & Cups | Redline |
| Pedals | Haro Fusion |
| Brakes | Box Three |
| Brake Pads | Box Three |
| Brake Cable | Box Three |
| Seat | MCS |
| Seat Clamp | Pro Max |
| Seat Post | MCS (26.8) |
| Wheels | Skyway Graphite Tuff Wheels |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold Anodized |
| Chain Tensioners | Promax |
| Valve Caps | Punisher Gold Alloy |
PK Ripper – Vans “Euro” Edition – Serial # 500! (2021)
Vans PK Ripper - Serial # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. This is the LAST ONE BUILT! Serial # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not shown in the photos) Note: US Models did not receive the Front Brake. This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Serial Number | This is the last one built - # 500! |