Back to Dream Bikes
PK Ripper – Red & Black (2021)
$1,395.00
This bike started life as a 2021 Vans Limited Edition PK Ripper Looptail. We then chose to add Black & Silver Components in place of the Stock Yellow Components.
This Bike has SOLD!
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing – Silver |
| Stem | SE Racing – Black |
| Handle Bars | SE Racing – Black |
| Grips | AME |
| Donuts | SE Racing |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | Haro Fusion (Alloy) |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Skyway Tuff Wheels |
| Hubs | Sealed Bearings |
| Tires | Tioga Comp II’s |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Chain Tensioners | SE Racing – Black Anodized |
| Valve Caps | Red Alloy |
| Pad Set | SE Racing |
| Sticker Set | Black PK Ripper |
.
.
.
Out of stock
Related products
PK Ripper – Vans “Euro” Edition – Serial # 500! (2021)
Vans PK Ripper - Serial # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. This is the LAST ONE BUILT! Serial # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not shown in the photos) Note: US Models did not receive the Front Brake. This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Serial Number | This is the last one built - # 500! |
Skyway T/A-20 – Candy Chrome Blue (2022)
This build is based off of the Candy Chrome Blue Skyway Frames that Planet BMX released. These are Beautiful Frames and very hard to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Graphite Skyway Tuff Wheels and 60th Anniversary Skyway Pedals! This one has sold but we have another one "in the works". Call if interested.
This Bike has SOLD. If this bike is of interest to you we may be able to build one for you. (Depending on current inventory)
.
.
.
[gallery ids="2734,2735,2736,2737,2738,2739"]
| Frame | Skyway T/A Pro XL - Candy Chrome Blue |
| Fork | Skyway T/A Pro - Candy Chrome Blue |
| Headset 1 1/8 | HARO Sealed Bearings |
| Stem | HARO Lineage - 52mm |
| Handle Bars | HARO |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks 175mm |
| Sprocket | Neptune 44th |
| B.B.– Euro | MCS |
| Pedals | Skyway 60th Anniversary |
| Brakes | Box 3 Pro |
| Brake Pads | Kool Stop |
| Brake Cable | Box 3 |
| Seat | MCS “Expert” (Black N Blue) |
| Seat Clamp | HARO Baseline |
| Seat Post | MCS 350mm |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Axle Nuts | TNT Alloy – Black |
| Axle Washers | SE Racing |
| Valve Caps | Box Alloy Blue Anodized |
| Headset Top Cap | FSA |
| Pad Set | Skyway |
Torker Pro XL (1998)
1998 Torker Pro XL - USA Made
This Bike started as a used ALUMINUM Torker Frame that I purchased off of E-Bay. (These are SUPER hard to Frames to find) The frame was advertised as a 1999 model but after some research I believe it to be a 1998 model. (I'm not 100% sure) A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Skyway Graphite Tuff Wheels & Box Brakes to name a few. All of the parts are brand new however the frame is a 98/99 “Pro XL” model and as mentioned it is “used” and does have some scuffs/scratches but overall it looks great but I do want to stress it is a used Frame! . Disclaimer, I'm not sure how many years Torker made these Aluminum Frames but I don't believe it was many. With that being said I believe this is a 1998 or 1999 model. . Note: As with all of our bikes I am open to some parts swapping to either fit your needs or in some cases lower the overall price! . .| Frame | Torker Pro XL (Aluminum) |
| Fork | Torker Cro Moly |
| Handle Bars | Cro Moly |
| Stem | Torker 6 Bolt |
| Headset | SE Racing |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | SE Racing Spider / Guru Sprocket |
| B.B. & Cups | Redline |
| Pedals | Haro Fusion |
| Brakes | Box Three |
| Brake Pads | Box Three |
| Brake Cable | Box Three |
| Seat | MCS |
| Seat Clamp | Pro Max |
| Seat Post | MCS (26.8) |
| Wheels | Skyway Graphite Tuff Wheels |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold Anodized |
| Chain Tensioners | Promax |
| Valve Caps | Punisher Gold Alloy |
PK Ripper – Black & Blue (2021)
This bike was a 2021 "Vans" PK Ripper that we added some high end components to such as Redline Flight Cranks and Cook Brothers Brakes!
This Bike has SOLD! I do have another one in the works that is similar but has darker decals (Dark Blue) Give me a call if interested!
.
.
.
[gallery ids="2805,2806,2807,2808,2809,2810"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | Cook Brothers |
| Stem 1 /18” | Pro Max Impact |
| Handle Bars | Race Inc |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 175mm - Chrome |
| Sprocket | Neptune 43 tooth – Blue |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Cook Brothers |
| Brake Pads | Cook Brothers |
| Brake Cable | MCS Lightning |
| Brake Lever | Cook Brothers |
| Seat | MCS |
| Seat Clamp | SE Racing – Blue Anodized |
| Seat Post | Blue / Silver Fluted |
| Wheels | Ryno Lite Rims / TNT Hubs |
| Tires | SE Racing Vee Rubber Cub 2.0” |
| Tubes | BMX Guru |
| Freewheel | Ride Out Supply |
| Chain | Izumi – Chrome |
| Chain Tensioners | Optional |
| Axle Nuts | TNT Alloy – Blue Anodized |
| Valve Caps | Box One – Blue Anodized |
| Sticker Set | P.K. Ripper – Blue |
| Powder Coat | Frame / Fork |