Back to Dream Bikes
Race Inc RA20-R – Blue (2022)
$1,150.00
2022 Race Inc 20″ BMX Bike with Blue Anodized Components
This Bike has SOLD!
| Frame | Race Inc RA20-R |
| Fork | Race Inc |
| Headset 1 1/8 | Tange DX 4 |
| Stem | SE Racing |
| Handle Bars | Race Inc |
| Grips | AME |
| Cranks | Alloy 3 Piece |
| Sprocket | Alloy 3 Piece |
| B.B. | YST Seal Bearing |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Box 3 – Blue |
| Brake Pads | Box 3 – Blue |
| Brake Cable | Box 3 – Blue |
| Seat | Dominator |
| Seat Clamp | SE Racing |
| Seat Post | Fluted |
| Wheels | SE Racing |
| Freewheel | Box 2 |
| Tires | Comp II’s |
| Tubes | Race Inc |
| Chain | Box Two “Nickel” |
| Valve Caps | Blue Alloy |
| Pad Set | Race Inc |
.
.
.
Out of stock
Related products
Torker Pro XL (1998)
1998 Torker Pro XL - USA Made
This Bike started as a used ALUMINUM Torker Frame that I purchased off of E-Bay. (These are SUPER hard to Frames to find) The frame was advertised as a 1999 model but after some research I believe it to be a 1998 model. (I'm not 100% sure) A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Skyway Graphite Tuff Wheels & Box Brakes to name a few. All of the parts are brand new however the frame is a 98/99 “Pro XL” model and as mentioned it is “used” and does have some scuffs/scratches but overall it looks great but I do want to stress it is a used Frame! . Disclaimer, I'm not sure how many years Torker made these Aluminum Frames but I don't believe it was many. With that being said I believe this is a 1998 or 1999 model. . Note: As with all of our bikes I am open to some parts swapping to either fit your needs or in some cases lower the overall price! . .| Frame | Torker Pro XL (Aluminum) |
| Fork | Torker Cro Moly |
| Handle Bars | Cro Moly |
| Stem | Torker 6 Bolt |
| Headset | SE Racing |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | SE Racing Spider / Guru Sprocket |
| B.B. & Cups | Redline |
| Pedals | Haro Fusion |
| Brakes | Box Three |
| Brake Pads | Box Three |
| Brake Cable | Box Three |
| Seat | MCS |
| Seat Clamp | Pro Max |
| Seat Post | MCS (26.8) |
| Wheels | Skyway Graphite Tuff Wheels |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold Anodized |
| Chain Tensioners | Promax |
| Valve Caps | Punisher Gold Alloy |
PK Ripper – Black & Gold (2021)
This bike started life as a 2021 Vans Limited Edition We then chose to add Gold Components. Some key components on this one are Redline Flight Cranks, Skyway Tuff Wheels with Sealed Bearing Hubs, SE Racing Bear Trap Pedals and Pro Max Brakes!
This Bike has Sold!
.
.
.
[gallery ids="2833,2834,2835,2836,2837"]
| Frame | 2021 Vans PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing – Gold Anodized |
| Stem | SE Racing – Gold Anodized 55mm |
| Handle Bars | SE Racing – Chrome |
| Grips | AME |
| Donuts | Optional |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 43 tooth – Black |
| B.B. | SE Sealed Bearings |
| Pedals | SE Racing Bear Trap |
| Brakes | Pro Max – Gold Anodized |
| Brake Pads | Kool Stop Eagle II |
| Brake Cable | Pro Max |
| Brake Lever | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Gold Anodized |
| Seat Post | SE Racing Fluted |
| Wheels | Skyway Tuff Wheels – Sealed Bearing Hubs |
| Tires | Tioga Comp III’s |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Chain Tensioners | SE Gold Anodized |
| Axle Nuts | Stock |
| Valve Caps | Black Dice Caps |
| Sticker Set | SE Racing – Gold |
PK Ripper – Vans “Euro” Edition – Serial # 500! (2021)
Vans PK Ripper - Serial # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. It comes with Front Brakes (not shown in the photos) and is the LAST ONE BUILT! Serial # 500 We've installed some Red SE Vee Cub Tires and Red grips because we like the look! It does come with the Factory Tires and Factory Grips if you want to put it back to 100% stock. Factory checkerboard Pad Set also included (Not Shown)| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | SE Racing - Red Anodized |
| Stem 1 /18” | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing |
| Grips | SE Racing (Red ones installed for now) |
| Cranks | SE Racing |
| Sprocket | SE Racing |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Box 3 |
| Brake Pads | Box 3 |
| Brake Cable | Tektro |
| Brake Lever | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing |
| Wheels | SE Racing |
| Tires | SE Racing Cub Vee 2.0 - Red |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |
| Serial Number | This is the last one built - # 500! |
PK Ripper – Black & Red (2021)
2021 PK Ripper Looptail - Custom - Black with Red Anodized parts. (as with any of our bikes we can swap parts if desired) We've kept the cost of this build for our customers that are looking to get into a new bike for less money. Keep in mind the modern day PK Rippers have a longer top tube length (20") making them a bit easier to ride vs the Old School versions!
This Bike has SOLD!
.
.
.
[gallery ids="2929,2930,2931,2932,2933,2934"]
| Frame | 2021 PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing |
| Grips | SE Racing Cult |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | SE Racing Bear Trap Style |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Race Inc – Seal Bearing Hubs |
| Tires | Tioga Comp III's |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Valve Caps | Black Dice Caps |
| Sticker Set | Black PK Ripper |