Back to Dream Bikes
Redline Proline “Resto Mod” – 30th Anniversary (2004)
$1,895.00
This build is what they call in the Car World . . . . A “Resto Mod”. It is based off of a Modern Redline Frame & Fork which will feature V-Brakes and a thread-less headset but will have the old school looks of a late 70’s era Redline “Proline”. This is a bike you can ride while enjoying the looks of an old school classic with features such as Redline Flight Cranks and Modern Skyway “Graphite/Carbon Fiber mix” Tuff Wheels!
Note: This bike has SOLD! . . . If you’re interested in this bike or one similar I can build one!
| Frame | 30th Anniversary Redline Proline Aluminum |
| Fork | 30th Anniversary Redline Proline Cro Moly |
| Handle Bars | 9″ Rise Cro Moly |
| Stem | SE Racing |
| Headset | SE Racing Sealed Bearings |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Flight Crank Style 44th |
| B.B. & Cups | Redline |
| Pedals | MKS Graphite |
| Brakes | Box Three |
| Brake Lever | Box Three |
| Brake Pads | Box Three |
| Brake Cable | MCS Lightning Cable |
| Seat | Dominator |
| Seat Clamp | Promax |
| Seat Post | Kalloy 26.8mm |
| Rims | Skyway Tuff Wheels – Graphite/Carbon Fiber Mix |
| Hubs | Sealed Bearing – Gold Flanges |
| Spokes | Does not apply |
| Nipples | Does not apply |
| Tires | Comp II’s |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Izumi – Chrome |
| Axle Nuts | Alloy – Red Anodized |
| Chain Tensioners | MCS |
| Valve Caps | Box One Red Alloy |
| Decal Set | Redline Proline “70’s Era” |
| Powder Coat | Gloss White |
Photo below shows the Frame & Fork prior to Powder Coating. We have them professionally media blasted and then sand them with 600, 1000 & 1500 before powder coating! We also scotch brite the welds prior to powder coat. The result is a better – stronger finish than the factory provided!
.
.
Out of stock
Related products
Skyway T/A-20 – Candy Chrome Red – Blue Mags (2022)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are very hard Frames to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Blue Skyway Tuff Wheels and Bear Trap Pedals.
This Bike has SOLD!
.
.
.
[gallery ids="2866,2867,2874,2868,2869,2872,2870,2871,2873"]
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler Stem |
| Handle Bars | HARO Baseline |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108 mm V Brakes |
| Brake Pads | Kool Stop |
| Brake Lever | Box Brand |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Chrome Straight Post (25.4) |
| Wheels | Skyway Tuff Wheels |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Valve Caps | Insight Red Anodized |
| Headset Top Cap | Red Anodized |
| Pad Set | Skyway |
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. (Not installed during the photo shoot) The Oakley's will be packed with care for the future owner. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! This bike isn't currently for sale but if you're really - really interested you can contact me and we'll see if I'm ready to sell it yet. All of the original parts as well as the Haro Sunglasses will be included in the sale at some point . . . I kept ALL of the original packing material and took good photos of where everything goes in the event it does sell someday. If you're interested in this bike you can contact me to see if I'm interested in selling it . . . . I can't keep all of them so it will sell at some point. . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
Redline by Kastan RL 20 II (2023)
This Kit has SOLD!
Cali Red Frame Set - Serial # 016
Frame, Fork, Handlebars and Number Plate have arrived!!
.
.
PK Ripper – Vans Edition (2021)
This Bike has Sold!
2021 Vans Edition PK Ripper - This one is 100% stock the way they come from SE Racing. Only 1 of these available. 1 of 250 made for the U.S. Market!
.
.
.
[gallery ids="2818,2825,2824,2823,2822,2821,2820,2819"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | "Off the Wall" Landing Gear |
| Headset 1 1/8 | SE Racing – Red Anodized |
| Stem 1 /18” | SE Racing – Black Anodized 55mm (Vans Edition) |
| Handle Bars | SE Racing Cro Moly |
| Grips | Vans X Cult Grips |
| Cranks | SE Racing 3 Piece |
| Sprocket | SE Racing 44 tooth |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 V Brakes |
| Brake Pads | Tektro |
| Brake Cable | Tektro Slick Cable |
| Brake Lever | Tektro 316A - Alloy |
| Seat | SE Racing |
| Seat Clamp | SE Racing Champ Clamp – Red Anodized |
| Seat Post | SE Racing - Fluted |
| Wheels | SE Racing Double Wall with Seal Bearing Mohawk Hubs |
| Tires | Vans X Cult |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Pad Set | Vans "Off the Wall" Checkerboard Edition |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |