Back to Dream Bikes
Haro Master (2018)
$2,600.00
2018 Haro Master – Custom Built with the following parts . . . . (This is a high end build featuring Skyway Graphite Mags, Haro Group 1 Cranks and a 40th Anniversary Sprocket that came from Australia)
.
This Bike has SOLD!
.
| Frame | Haro Master – Lineage |
| Fork | Haro |
| Headset | Haro |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Haro Group 1 |
| Sprocket | Bob Haro Redline 40th Anniversary 28th |
| B.B. | Odyssey |
| Pedals | MKS Graphite |
| Brakes | Dia Compe AD 996’s |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Odyssey |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | MCS Alloy |
| Wheels | Graphite Tuff Wheels |
| Tires | Kenda K841 20 x 2.25 |
| Tubes | GURU |
| Cassette | 9th – Skyway |
| Chain | Izumi – Chrome |
| Chain Tensioners | Built into the Frame |
| Axle Pegs | Optional |
| Valve Caps | Box One – Blue Anodized |
| Detangler | Snafu |
| Gyro Plate | Snafu |
.
.
.
Out of stock
Related products
PK Ripper – Black & Red (2021)
2021 PK Ripper Looptail - Custom - Black with Red Anodized parts. (as with any of our bikes we can swap parts if desired) We've kept the cost of this build for our customers that are looking to get into a new bike for less money. Keep in mind the modern day PK Rippers have a longer top tube length (20") making them a bit easier to ride vs the Old School versions!
This Bike has SOLD!
.
.
.
[gallery ids="2929,2930,2931,2932,2933,2934"]
| Frame | 2021 PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing |
| Grips | SE Racing Cult |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | SE Racing Bear Trap Style |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Race Inc – Seal Bearing Hubs |
| Tires | Tioga Comp III's |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Valve Caps | Black Dice Caps |
| Sticker Set | Black PK Ripper |
Skyway T/A-20 – Candy Chrome Red – Black Mags (2022)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are Beautiful Frames and very hard to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Graphite Skyway Tuff Wheels and a Box Brake Lever!
This Bike has SOLD!
.
.
.
[gallery ids="2728,2729,2730,2731,2732,2733"]
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler |
| Handle Bars | HARO Cro Moly |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108mm V Brakes / Box Lever |
| Brake Pads | Kool Stop |
| Brake Cable | Pro Max |
| Seat | MCS “Expert” (Black N Red) |
| Seat Clamp | HARO Baseline |
| Seat Post | MCS 350mm |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Axle Nuts | TNT Alloy – Red |
| Axle Washers | SE Racing |
| Valve Caps | Insight Red Anodized Aluminum |
| Headset Top Cap | FSA |
| Pad Set | Skyway |
PK Ripper – Vans “Euro” Edition – Frame # 500! (2021)
Vans PK Ripper - Frame # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. Frame # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not currently installed) Note: US Models did not receive the Front Brake. This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Frame Number | 500 |
Torker Pro XL (1998)
1998 Torker Pro XL - USA Made
This Bike started as a used ALUMINUM Torker Frame that I purchased off of E-Bay. (These are SUPER hard to Frames to find) The frame was advertised as a 1999 model but after some research I believe it to be a 1998 model. (I'm not 100% sure) A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Skyway Graphite Tuff Wheels & Box Brakes to name a few. All of the parts are brand new however the frame is a 98/99 “Pro XL” model and as mentioned it is “used” and does have some scuffs/scratches but overall it looks great but I do want to stress it is a used Frame! . Disclaimer, I'm not sure how many years Torker made these Aluminum Frames but I don't believe it was many. With that being said I believe this is a 1998 or 1999 model. . Note: As with all of our bikes I am open to some parts swapping to either fit your needs or in some cases lower the overall price! . .| Frame | Torker Pro XL (Aluminum) |
| Fork | Torker Cro Moly |
| Handle Bars | Cro Moly |
| Stem | Torker 6 Bolt |
| Headset | SE Racing |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | SE Racing Spider / Guru Sprocket |
| B.B. & Cups | Redline |
| Pedals | Haro Fusion |
| Brakes | Box Three |
| Brake Pads | Box Three |
| Brake Cable | Box Three |
| Seat | MCS |
| Seat Clamp | Pro Max |
| Seat Post | MCS (26.8) |
| Wheels | Skyway Graphite Tuff Wheels |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold Anodized |
| Chain Tensioners | Promax |
| Valve Caps | Punisher Gold Alloy |