Back to Dream Bikes
Sale!
Powerlite P61 (1998)
Original price was: $1,950.00.$1,899.00Current price is: $1,899.00.
1998 Powerlite P-61
This Bike started as a used 1998 Frame that I purchased off of E-Bay. A host of high end parts were added to finish off the build . . . Race Inc Forks, Redline Flight Cranks, Promax Stem & Box Brakes to name a few. All of the parts are brand new, the frame is a ’98’ P-61 Model and as mentioned it is “used” but is in excellent condition!
This Bike Has sold!
| Frame | Powerlite P61 6061-T6 Aluminum Frame |
| Fork | Race Inc Cro-Moly |
| Handle Bars | Shadow Conspiracy Vultus SG |
| Stem | Promax |
| Headset | Chris King |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Chain Ring | MCS 44t |
| Spider / Bolts | Neptune |
| B.B. & Cups | Profile Bearings / Stolen Revolver Spacers |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Box Three Pro |
| Brake Pads | Promax |
| Brake Cable | MCS Lightning |
| Seat | Dominator |
| Seat Clamp | Race Inc |
| Seat Post | Kalloy 26.8 |
| Wheels | SE Racing Sealed Bearing (Mohawk Hubs) |
| Tires | Comp II’s |
| Tubes | BMX Guru Brand |
| Freewheel | Origin 8 Hornet |
| Chain | Izumi |
| Axle Nuts | TNT Alloy |
| Valve Caps | Gold Alloy |
| Decal Set | Powerlite P61 |
.
.
Out of stock
Related products
PK Ripper – Vans “Euro” Edition – Frame # 500! (2021)
Vans PK Ripper - Frame # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. Frame # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not currently installed) Note: US Models did not receive the Front Brake. This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Frame Number | 500 |
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. (Not installed during the photo shoot) The Oakley's will be packed with care for the future owner. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! This bike isn't currently for sale but if you're really - really interested you can contact me and we'll see if I'm ready to sell it yet. All of the original parts as well as the Haro Sunglasses will be included in the sale at some point . . . I kept ALL of the original packing material and took good photos of where everything goes in the event it does sell someday. If you're interested in this bike you can contact me to see if I'm interested in selling it . . . . I can't keep all of them so it will sell at some point. . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
Skyway T/A-20 – Candy Chrome Red – Blue Mags (2022)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are very hard Frames to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Blue Skyway Tuff Wheels and Bear Trap Pedals.
This Bike has SOLD!
.
.
.
[gallery ids="2866,2867,2874,2868,2869,2872,2870,2871,2873"]
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler Stem |
| Handle Bars | HARO Baseline |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108 mm V Brakes |
| Brake Pads | Kool Stop |
| Brake Lever | Box Brand |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Chrome Straight Post (25.4) |
| Wheels | Skyway Tuff Wheels |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Valve Caps | Insight Red Anodized |
| Headset Top Cap | Red Anodized |
| Pad Set | Skyway |
Skyway 60th Anniversary (2023)
Skyway 60th Anniversary Collectors Frame Set
This Bike is ready to go but does have some options! Our Frame set arrived in September (2023) and is # 148 out of 300. This bike currently features Spoked Wheels however I also have a set of the 60th Anniversary Skyway Graphite Tuff Wheels set aside for it along with a pair of Bullseye / Skyway Pedals. (Both of these are options) It also features a very rare set of 50th Anniversary "Redline by Kastan" Flight Cranks, Sprocket and Techmatic Bottom Bracket Set. If this is a bike you're interested in give me a call and we can discuss what options you prefer. The current price is for the Spoked Wheels and MKS Graphite Pedals.| Frame | Skyway Gold Plated – 60th Anniversary |
| Fork | Skyway Gold Plated – 60th Anniversary |
| Handle Bars | Skyway Gold Plated – 60th Anniversary |
| Stem | Pro Neck |
| Headset | Tange MX320 |
| Grips | AME |
| Cranks | Redline 50th Anniversary 175mm |
| Sprocket | Redline 50th Anniversary 44th |
| B.B. | Redline 50th Anniversary Techmatic |
| Pedals | MKS Graphite |
| Pedals | Skyway Bear Traps made by Bullseye! (Option) |
| Brakes | Dia Compe MX 1000 |
| Brake Pads | Dia Compe |
| Brake Cables | Alligator Stainless Cable |
| Brake Lever | Dia Compe |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | 7/8” Aluminum – Gold Anodized |
| Wheels | SE Racing w/ Sealed Bearing Hubs |
| Wheels | 60th Anniversary Graphite Tuff Wheels (Option) |
| Tires | Comp II's |
| Tubes | GURU |
| Freewheel | ACS 16th |
| Chain | Izumi – Gold |
| Valve Caps | Punisher Gold Alloy |