Back to Dream Bikes
Race Inc RA20-R – Blue (2022)
$1,150.00
2022 Race Inc 20″ BMX Bike with Blue Anodized Components
This Bike has SOLD!
| Frame | Race Inc RA20-R |
| Fork | Race Inc |
| Headset 1 1/8 | Tange DX 4 |
| Stem | SE Racing |
| Handle Bars | Race Inc |
| Grips | AME |
| Cranks | Alloy 3 Piece |
| Sprocket | Alloy 3 Piece |
| B.B. | YST Seal Bearing |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Box 3 – Blue |
| Brake Pads | Box 3 – Blue |
| Brake Cable | Box 3 – Blue |
| Seat | Dominator |
| Seat Clamp | SE Racing |
| Seat Post | Fluted |
| Wheels | SE Racing |
| Freewheel | Box 2 |
| Tires | Comp II’s |
| Tubes | Race Inc |
| Chain | Box Two “Nickel” |
| Valve Caps | Blue Alloy |
| Pad Set | Race Inc |
.
.
.
Out of stock
Related products
Haro Master (2018)
2018 Haro Master - Custom Built with the following parts . . . . (This is a high end build featuring Skyway Graphite Mags, Haro Group 1 Cranks and a 40th Anniversary Sprocket that came from Australia)
.
This Bike has SOLD!
.
.
.
.
[gallery ids="3433,3434,3435,3436,3437,3438,3439,3440,3441,3442"]
| Frame | Haro Master – Lineage |
| Fork | Haro |
| Headset | Haro |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Haro Group 1 |
| Sprocket | Bob Haro Redline 40th Anniversary 28th |
| B.B. | Odyssey |
| Pedals | MKS Graphite |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Odyssey |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | MCS Alloy |
| Wheels | Graphite Tuff Wheels |
| Tires | Kenda K841 20 x 2.25 |
| Tubes | GURU |
| Cassette | 9th - Skyway |
| Chain | Izumi – Chrome |
| Chain Tensioners | Built into the Frame |
| Axle Pegs | Optional |
| Valve Caps | Box One – Blue Anodized |
| Detangler | Snafu |
| Gyro Plate | Snafu |
PK Ripper – Vans “Euro” Edition – Frame # 500! (2021)
Vans PK Ripper - Frame # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. Frame # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not currently installed) Note: US Models did not receive the Front Brake. This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Frame Number | 500 |
PK Ripper – Black & Gold w/Graphites (2021)
This bike started life as a 2021 Vans Limited Edition We then chose to add Gold Components. Some key components on this one are Redline Flight Cranks, Graphite Skyway Tuff Wheels with Gold Sealed Bearing Hubs, Skyway 60th Anniversary Pedals and Box Brakes! This is a very "High End" build. We could lower the price on this one by swapping out some of the High Components . . .
This Bike has SOLD!
.
.
.
[gallery ids="2740,2741,2742,2743,2744"]
| Frame | 2021 Vans PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | SE Racing - Gold Anodized |
| Stem | SE Racing - Gold Anodized 55mm |
| Handle Bars | SE Racing - Chrome |
| Grips | AME |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 43 tooth – Black |
| B.B. | SE Sealed Bearings |
| Pedals | Skyway 60th Anniversary Series |
| Brakes | Box 3 - Gold Anodized |
| Brake Pads | Kool Stop Eagle II |
| Brake Cable | Box 3 |
| Brake Lever | Box 3 |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Gold Anodized |
| Seat Post | SE Racing Fluted |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Chain Tensioners | SE Gold Anodized |
| Axle Nuts | TNT Alloy – Black |
| Valve Caps | Trik Topz – Gold Anodized |
| Sticker Set | SE Racing – Gold |
PK Ripper – Black & Blue (2021)
This bike was a 2021 "Vans" PK Ripper that we added some high end components to such as Redline Flight Cranks and Cook Brothers Brakes!
This Bike has SOLD! I do have another one in the works that is similar but has darker decals (Dark Blue) Give me a call if interested!
.
.
.
[gallery ids="2805,2806,2807,2808,2809,2810"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | Cook Brothers |
| Stem 1 /18” | Pro Max Impact |
| Handle Bars | Race Inc |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 175mm - Chrome |
| Sprocket | Neptune 43 tooth – Blue |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Cook Brothers |
| Brake Pads | Cook Brothers |
| Brake Cable | MCS Lightning |
| Brake Lever | Cook Brothers |
| Seat | MCS |
| Seat Clamp | SE Racing – Blue Anodized |
| Seat Post | Blue / Silver Fluted |
| Wheels | Ryno Lite Rims / TNT Hubs |
| Tires | SE Racing Vee Rubber Cub 2.0” |
| Tubes | BMX Guru |
| Freewheel | Ride Out Supply |
| Chain | Izumi – Chrome |
| Chain Tensioners | Optional |
| Axle Nuts | TNT Alloy – Blue Anodized |
| Valve Caps | Box One – Blue Anodized |
| Sticker Set | P.K. Ripper – Blue |
| Powder Coat | Frame / Fork |