Back to Dream Bikes
PK Ripper – Black & Blue – High End Parts (2021)
$2,250.00
This bike started life as a 2021 Vans Limited Edition Bike. I then media blasted the Frame & Fork, Wet Sanded it down to 3000 grit and then Powder Coated it Gloss Black. A host of “High End” Components were added such as Redline Flight Cranks, TNT Hubs, Ryno Lite XL Rims and Cook Brothers Brakes & Headset! One of the 1st PK Rippers we put on the website was similar to this and it sold right away so we built another one with slightly Darker Decals but similar parts list.
This Bike has SOLD!
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset | Cook Brothers |
| Stem | Pro Max Impact |
| Handle Bars | Race Inc Cro Moly |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 175mm – Chrome |
| Sprocket | Neptune 43 tooth – Blue |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Cook Brothers / Box One |
| Brake Pads | Cook Brothers / Box One |
| Brake Cable | MCS Lightning |
| Brake Lever | Cook Brothers / Box One |
| Seat | MCS – Padded |
| Seat Clamp | SE Racing – Blue Anodized |
| Seat Post | Blue / Silver Fluted |
| Wheels | Ryno Lite Rims / TNT Hubs |
| Tires | SE Racing Vee Rubber Cub 2.0” |
| Tubes | BMX Guru |
| Freewheel | Ride Out Supply |
| Chain | Izumi – Chrome |
| Chain Tensioners | Optional |
| Axle Nuts | TNT Alloy – Blue Anodized |
| Valve Caps | Box One – Blue Anodized |
| Sticker Set | P.K. Ripper – Blue |
| Powder Coat | Frame / Fork |
.
.
.
Out of stock
Related products
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. (Not installed during the photo shoot) The Oakley's will be packed with care for the future owner. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! This bike isn't currently for sale but if you're really - really interested you can contact me and we'll see if I'm ready to sell it yet. All of the original parts as well as the Haro Sunglasses will be included in the sale at some point . . . I kept ALL of the original packing material and took good photos of where everything goes in the event it does sell someday. If you're interested in this bike you can contact me to see if I'm interested in selling it . . . . I can't keep all of them so it will sell at some point. . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
Skyway T/A-20 – Candy Chrome Blue (2022)
This build is based off of the Candy Chrome Blue Skyway Frames that Planet BMX released. These are Beautiful Frames and very hard to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Graphite Skyway Tuff Wheels and 60th Anniversary Skyway Pedals! This one has sold but we have another one "in the works". Call if interested.
This Bike has SOLD. If this bike is of interest to you we may be able to build one for you. (Depending on current inventory)
.
.
.
[gallery ids="2734,2735,2736,2737,2738,2739"]
| Frame | Skyway T/A Pro XL - Candy Chrome Blue |
| Fork | Skyway T/A Pro - Candy Chrome Blue |
| Headset 1 1/8 | HARO Sealed Bearings |
| Stem | HARO Lineage - 52mm |
| Handle Bars | HARO |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks 175mm |
| Sprocket | Neptune 44th |
| B.B.– Euro | MCS |
| Pedals | Skyway 60th Anniversary |
| Brakes | Box 3 Pro |
| Brake Pads | Kool Stop |
| Brake Cable | Box 3 |
| Seat | MCS “Expert” (Black N Blue) |
| Seat Clamp | HARO Baseline |
| Seat Post | MCS 350mm |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Axle Nuts | TNT Alloy – Black |
| Axle Washers | SE Racing |
| Valve Caps | Box Alloy Blue Anodized |
| Headset Top Cap | FSA |
| Pad Set | Skyway |
PK Ripper – Black & Blue (2021)
This bike was a 2021 "Vans" PK Ripper that we added some high end components to such as Redline Flight Cranks and Cook Brothers Brakes!
This Bike has SOLD! I do have another one in the works that is similar but has darker decals (Dark Blue) Give me a call if interested!
.
.
.
[gallery ids="2805,2806,2807,2808,2809,2810"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | Cook Brothers |
| Stem 1 /18” | Pro Max Impact |
| Handle Bars | Race Inc |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 175mm - Chrome |
| Sprocket | Neptune 43 tooth – Blue |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Cook Brothers |
| Brake Pads | Cook Brothers |
| Brake Cable | MCS Lightning |
| Brake Lever | Cook Brothers |
| Seat | MCS |
| Seat Clamp | SE Racing – Blue Anodized |
| Seat Post | Blue / Silver Fluted |
| Wheels | Ryno Lite Rims / TNT Hubs |
| Tires | SE Racing Vee Rubber Cub 2.0” |
| Tubes | BMX Guru |
| Freewheel | Ride Out Supply |
| Chain | Izumi – Chrome |
| Chain Tensioners | Optional |
| Axle Nuts | TNT Alloy – Blue Anodized |
| Valve Caps | Box One – Blue Anodized |
| Sticker Set | P.K. Ripper – Blue |
| Powder Coat | Frame / Fork |
PK Ripper – Black & Red (2021)
2021 PK Ripper Looptail - Custom - Black with Red Anodized parts. (as with any of our bikes we can swap parts if desired) We've kept the cost of this build for our customers that are looking to get into a new bike for less money. Keep in mind the modern day PK Rippers have a longer top tube length (20") making them a bit easier to ride vs the Old School versions!
This Bike has SOLD!
.
.
.
[gallery ids="2929,2930,2931,2932,2933,2934"]
| Frame | 2021 PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing |
| Grips | SE Racing Cult |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | SE Racing Bear Trap Style |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Race Inc – Seal Bearing Hubs |
| Tires | Tioga Comp III's |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Valve Caps | Black Dice Caps |
| Sticker Set | Black PK Ripper |