Back to Dream Bikes
Redline Flight Pro XL – (Bubba Harris Model) – 2007
$0.00
We have a Redline Flight Pro XL “Bubba Harris” model in the works
Check back as progress continues on this iconic Redline!
SKU: 07Flight
Category: Dream Bikes
Related products

PK Ripper – Baby Blue & Gold (2021)
This bike started life as a 2021 Vans Limited Edition that was custom painted SE Racing Baby Blue by Autokraft Restorations. Autokraft is a high end Muscle Car Restoration Shop that I work at. The Frame & Fork were professionally painted in a booth and is every bit as good if not better than the factory paint! Our Painter has been painting for 30 + years! Satisfaction Guaranteed! We then chose to add Gold Components. Some key components on this one are Redline Flight Cranks, Technique F6 Rocket Pod Hubs, Ryno Lite XL Rims and Promax Brakes.
This Bike has SOLD. If this bike is of interest to you we may be able to build one for you. (Depending on current inventory)
.
.
.
[gallery ids="3443,3444,3445,3446,3447,3448"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear - Baby Blue |
| Headset 1 1/8 | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing – Chrome |
| Grips | AME |
| Donuts | SE |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th – Gold |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Pro Max |
| Brake Pads | Pro Max |
| Brake Cable | Pro Max |
| Seat | Dominator |
| Seat Clamp | Pro Max |
| Seat Post | Fluted |
| Rims | Rhyno XL Chrome |
| Hubs | Technique F6 Rocket Pod Hubs |
| Spokes/Nipples | Stainless / Gold Alloy Nipples |
| Tires | Tioga Comp II's |
| Tubes | GURU |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Chain Tensioners | Optional |
| Axle Nuts | Technique |
| Valve Caps | Trik Topz – Gold Alloy |
| Pad Set | SE Racing |
| Sticker Set | SE Racing - BMX Products USA |
| Custom Paint | Autokraft Restorations |

PK Ripper – Black & Red (2021)
2021 PK Ripper Looptail - Custom - Black with Red Anodized parts. (as with any of our bikes we can swap parts if desired) We've kept the cost of this build for our customers that are looking to get into a new bike for less money. Keep in mind the modern day PK Rippers have a longer top tube length (20") making them a bit easier to ride vs the Old School versions!
This Bike has SOLD!
.
.
.
[gallery ids="2929,2930,2931,2932,2933,2934"]
| Frame | 2021 PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing |
| Grips | SE Racing Cult |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | SE Racing Bear Trap Style |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Race Inc – Seal Bearing Hubs |
| Tires | Tioga Comp III's |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Valve Caps | Black Dice Caps |
| Sticker Set | Black PK Ripper |

PK Ripper – Vans “Euro” Edition – Frame # 500! (2021)
Vans PK Ripper - Frame # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. Frame # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not currently installed) The Front Brake was part of the Euro package, not available on the U.S. models!This Bike Has Sold!
This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Frame Number | 500 |

Haro Master (2018)
2018 Haro Master - Custom Built with the following parts . . . . (This is a high end build featuring Skyway Graphite Mags, Haro Group 1 Cranks and a 40th Anniversary Sprocket that came from Australia)
.
This Bike has SOLD!
.
.
.
.
[gallery ids="3433,3434,3435,3436,3437,3438,3439,3440,3441,3442"]
| Frame | Haro Master – Lineage |
| Fork | Haro |
| Headset | Haro |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Haro Group 1 |
| Sprocket | Bob Haro Redline 40th Anniversary 28th |
| B.B. | Odyssey |
| Pedals | MKS Graphite |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Odyssey |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | MCS Alloy |
| Wheels | Graphite Tuff Wheels |
| Tires | Kenda K841 20 x 2.25 |
| Tubes | GURU |
| Cassette | 9th - Skyway |
| Chain | Izumi – Chrome |
| Chain Tensioners | Built into the Frame |
| Axle Pegs | Optional |
| Valve Caps | Box One – Blue Anodized |
| Detangler | Snafu |
| Gyro Plate | Snafu |
