Back to Dream Bikes
PK Ripper – Black & Red (2021)
$1,250.00
2021 PK Ripper Looptail – Custom – Black with Red Anodized parts. (as with any of our bikes we can swap parts if desired) We’ve kept the cost of this build for our customers that are looking to get into a new bike for less money. Keep in mind the modern day PK Rippers have a longer top tube length (20″) making them a bit easier to ride vs the Old School versions!
This Bike has SOLD!
| Frame | 2021 PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing |
| Grips | SE Racing Cult |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | SE Racing Bear Trap Style |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Race Inc – Seal Bearing Hubs |
| Tires | Tioga Comp III’s |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Valve Caps | Black Dice Caps |
| Sticker Set | Black PK Ripper |
.
.
.
Out of stock
Related products
Skyway T/A-20 – Candy Chrome Red – Blue Mags (2022)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are very hard Frames to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Blue Skyway Tuff Wheels and Bear Trap Pedals.
This Bike has SOLD!
.
.
.
[gallery ids="2866,2867,2874,2868,2869,2872,2870,2871,2873"]
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler Stem |
| Handle Bars | HARO Baseline |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108 mm V Brakes |
| Brake Pads | Kool Stop |
| Brake Lever | Box Brand |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Chrome Straight Post (25.4) |
| Wheels | Skyway Tuff Wheels |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Valve Caps | Insight Red Anodized |
| Headset Top Cap | Red Anodized |
| Pad Set | Skyway |
PK Ripper – Baby Blue & Gold (2021)
This bike started life as a 2021 Vans Limited Edition that was custom painted SE Racing Baby Blue by Autokraft Restorations. Autokraft is a high end Muscle Car Restoration Shop that I work at. The Frame & Fork were professionally painted in a booth and is every bit as good if not better than the factory paint! Our Painter has been painting for 30 + years! Satisfaction Guaranteed! We then chose to add Gold Components. Some key components on this one are Redline Flight Cranks, Technique F6 Rocket Pod Hubs, Ryno Lite XL Rims and Promax Brakes.
This Bike has SOLD. If this bike is of interest to you we may be able to build one for you. (Depending on current inventory)
.
.
.
[gallery ids="3443,3444,3445,3446,3447,3448"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear - Baby Blue |
| Headset 1 1/8 | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing – Chrome |
| Grips | AME |
| Donuts | SE |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th – Gold |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Pro Max |
| Brake Pads | Pro Max |
| Brake Cable | Pro Max |
| Seat | Dominator |
| Seat Clamp | Pro Max |
| Seat Post | Fluted |
| Rims | Rhyno XL Chrome |
| Hubs | Technique F6 Rocket Pod Hubs |
| Spokes/Nipples | Stainless / Gold Alloy Nipples |
| Tires | Tioga Comp II's |
| Tubes | GURU |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Chain Tensioners | Optional |
| Axle Nuts | Technique |
| Valve Caps | Trik Topz – Gold Alloy |
| Pad Set | SE Racing |
| Sticker Set | SE Racing - BMX Products USA |
| Custom Paint | Autokraft Restorations |
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! The original wheels and seat will be included in the sale. . . I will pack this bike better than the factory did prior to shipping to the new owner! If you're interested in this bike you can contact me if you have any questions! Just to confirm, You will receive the bike as photographed AND the Factory Wheels as well as the Factory Seat & Seat Post, (Plus the components on the Bike now) That is also the reason it's priced above retail . . . . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
PK Ripper – Black & Blue (2021)
This bike was a 2021 "Vans" PK Ripper that we added some high end components to such as Redline Flight Cranks and Cook Brothers Brakes!
This Bike has SOLD! I do have another one in the works that is similar but has darker decals (Dark Blue) Give me a call if interested!
.
.
.
[gallery ids="2805,2806,2807,2808,2809,2810"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | Cook Brothers |
| Stem 1 /18” | Pro Max Impact |
| Handle Bars | Race Inc |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 175mm - Chrome |
| Sprocket | Neptune 43 tooth – Blue |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Cook Brothers |
| Brake Pads | Cook Brothers |
| Brake Cable | MCS Lightning |
| Brake Lever | Cook Brothers |
| Seat | MCS |
| Seat Clamp | SE Racing – Blue Anodized |
| Seat Post | Blue / Silver Fluted |
| Wheels | Ryno Lite Rims / TNT Hubs |
| Tires | SE Racing Vee Rubber Cub 2.0” |
| Tubes | BMX Guru |
| Freewheel | Ride Out Supply |
| Chain | Izumi – Chrome |
| Chain Tensioners | Optional |
| Axle Nuts | TNT Alloy – Blue Anodized |
| Valve Caps | Box One – Blue Anodized |
| Sticker Set | P.K. Ripper – Blue |
| Powder Coat | Frame / Fork |