Back to Dream Bikes
PK Ripper – Vans Edition (2021)
$1,500.00
This Bike has Sold!
2021 Vans Edition PK Ripper – This one is 100% stock the way they come from SE Racing. Only 1 of these available. 1 of 250 made for the U.S. Market!
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | “Off the Wall” Landing Gear |
| Headset 1 1/8 | SE Racing – Red Anodized |
| Stem 1 /18” | SE Racing – Black Anodized 55mm (Vans Edition) |
| Handle Bars | SE Racing Cro Moly |
| Grips | Vans X Cult Grips |
| Cranks | SE Racing 3 Piece |
| Sprocket | SE Racing 44 tooth |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 V Brakes |
| Brake Pads | Tektro |
| Brake Cable | Tektro Slick Cable |
| Brake Lever | Tektro 316A – Alloy |
| Seat | SE Racing |
| Seat Clamp | SE Racing Champ Clamp – Red Anodized |
| Seat Post | SE Racing – Fluted |
| Wheels | SE Racing Double Wall with Seal Bearing Mohawk Hubs |
| Tires | Vans X Cult |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Pad Set | Vans “Off the Wall” Checkerboard Edition |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |
.
.
.
Out of stock
Related products
Torker Pro XL (1998)
1998 Torker Pro XL - USA Made
This Bike started as a used ALUMINUM Torker Frame that I purchased off of E-Bay. (These are SUPER hard to Frames to find) The frame was advertised as a 1999 model but after some research I believe it to be a 1998 model. (I'm not 100% sure) A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Skyway Graphite Tuff Wheels & Box Brakes to name a few. All of the parts are brand new however the frame is a 98/99 “Pro XL” model and as mentioned it is “used” and does have some scuffs/scratches but overall it looks great but I do want to stress it is a used Frame! . Disclaimer, I'm not sure how many years Torker made these Aluminum Frames but I don't believe it was many. With that being said I believe this is a 1998 or 1999 model. . Note: As with all of our bikes I am open to some parts swapping to either fit your needs or in some cases lower the overall price! . .| Frame | Torker Pro XL (Aluminum) |
| Fork | Torker Cro Moly |
| Handle Bars | Cro Moly |
| Stem | Torker 6 Bolt |
| Headset | SE Racing |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | SE Racing Spider / Guru Sprocket |
| B.B. & Cups | Redline |
| Pedals | Haro Fusion |
| Brakes | Box Three |
| Brake Pads | Box Three |
| Brake Cable | Box Three |
| Seat | MCS |
| Seat Clamp | Pro Max |
| Seat Post | MCS (26.8) |
| Wheels | Skyway Graphite Tuff Wheels |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold Anodized |
| Chain Tensioners | Promax |
| Valve Caps | Punisher Gold Alloy |
Sale!
.
.
.
[gallery ids="4129,4136,4130,4131,4132,4133,4134,4135,4137,4138,4139,4140"]
.
Original price was: $1,900.00.$1,600.00Current price is: $1,600.00.
Read more
Redline Proline “Pro Model” (1997)
1997 Redline Proline
This Bike started as a used 1997 Frame that I purchased off of E-Bay. These were only offered as a "Catalog Frame" meaning you couldn't get this Frame as a complete bike. This was Redlines best Frame for 1997 and utilized 6061-T6 Aluminum vs. the cheaper 7005 tubing that was used in the complete bikes! I wet sanded the frame and polished it to look like new again. A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Redline Sprocket, Profile Stem & Box Brakes to name a few. All of the parts are brand new, the frame is a 97 Pro Model and as mentioned it is “used” and does have some scuffs/scratches that didn’t polish out. Overall it looks great but I do want to stress it is a used 1997 Frame! .This Bike has SOLD!
.| Frame | 1997 Redline Proline Frame |
| Fork | Factory Redline Forks |
| Handle Bars | Shadow Conspiracy Vultus SG |
| Stem | Profile 48mm |
| Headset | SE Racing |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks 175mm |
| Sprocket | Redline Flight Sprocket |
| B.B. & Cups | Stolen Revolver 19mm |
| Pedals | MKS Graphite |
| Brakes | Box |
| Brake Pads | Pro Max |
| Brake Cable | MCS Lightning Cable |
| Seat | MCS |
| Seat Clamp | Built In |
| Seat Post | Chrome Straight Post (26.8) |
| Wheels | SE Racing Sealed Bearing (Mohawk Hubs) |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ROS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Red |
| Axle Washers | SE Racing |
| Valve Caps | Box |
| Decal Set | Re-Rides (Optional) |
GT Speed Series “Team” (1998)
1998 GT Speed Series "Team"
This Bike has SOLD!
. This Bike started as a used 1998 Frame that I purchased off of E-Bay. I then wet sanded the frame and polished it to look like new again. A host of high end parts were added to finish off the build . . . GT Cranks & Cook Brothers Brakes to name a few. All of the parts are brand new, the frame is a 98 Speed Series "Team" model and as mentioned it is "used" and does have some scuffs/scratches that didn't polish out. Overall it looks great but I do want to stress it is a used 1998 Frame! Please Note: 1998 Decal Sets are not currently available so it has the 1997 Decals . . . (It is a 1998 Frame though as confirmed by the Serial #)| Frame | 1998 GT Speed Series "Team" |
| Fork | GT Cro Moly |
| Handle Bars | Shadow Conspiracy Vultus SG |
| Stem | Profile |
| Headset | SE Racing "Eluder" |
| Grips | AME Unitron |
| Cranks | GT 3 Piece |
| Sprocket | GT Overdrive (OG) |
| B.B. & Cups | Sealed Bearing 19mm |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Cook Brothers |
| Brake Pads | Cook Brothers |
| Brake Cable | Cook Brothers |
| Seat | MCS |
| Seat Clamp | Built In |
| Seat Post | Kalloy 27.0 |
| Wheels | SE Racing Sealed Bearing (Mohawk Hubs) |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ROS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold |
| Valve Caps | Gold Alloy |
| Decal Set | 1997 GT Speed Series “Team” |
PK Ripper – Vans “Euro” Edition – Frame # 500! (2021)
Vans PK Ripper - Frame # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. Frame # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not currently installed) The Front Brake was part of the Euro package, not available on the U.S. models!This Bike Has Sold!
This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Frame Number | 500 |