Back to Dream Bikes
Race Inc RA20-R – Red (2022)
$775.00
This bike started life as a 2022 RA20-R. We then chose to swap out some key Components giving the bike a bit more attitude but keeping the price down!
UPDATE: This Bike has SOLD!
| Frame | Race Inc RA20-R |
| Fork | Race Inc |
| Headset 1 1/8 | Race Inc |
| Stem | Race Inc |
| Handle Bars | Race Inc |
| Grips | AME |
| Cranks | SE Racing 3 Piece Cro Moly |
| Sprocket | Race Inc |
| B.B. | MCS Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Box 3 – Red |
| Brake Pads | Box 3 – Red |
| Brake Cable | Box 3 – Red |
| Seat | Race Inc Padded |
| Seat Clamp | SE Racing |
| Seat Post | Race Inc |
| Wheels | Race Inc |
| Freewheel | Box 2 |
| Tires | Comp II’s |
| Tubes | Race Inc |
| Chain | Box Two “Nickel” |
| Valve Caps | Red Alloy |
| Pad Set | Race Inc |
.
.
.
Out of stock
SKU: RA20-Red
Category: Dream Bikes
Related products

Haro Master (2018)
2018 Haro Master - Custom Built with the following parts . . . . (This is a high end build featuring Skyway Graphite Mags, Haro Group 1 Cranks and a 40th Anniversary Sprocket that came from Australia)
.
This Bike has SOLD!
.
.
.
.
[gallery ids="3433,3434,3435,3436,3437,3438,3439,3440,3441,3442"]
| Frame | Haro Master – Lineage |
| Fork | Haro |
| Headset | Haro |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Haro Group 1 |
| Sprocket | Bob Haro Redline 40th Anniversary 28th |
| B.B. | Odyssey |
| Pedals | MKS Graphite |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Odyssey |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | MCS Alloy |
| Wheels | Graphite Tuff Wheels |
| Tires | Kenda K841 20 x 2.25 |
| Tubes | GURU |
| Cassette | 9th - Skyway |
| Chain | Izumi – Chrome |
| Chain Tensioners | Built into the Frame |
| Axle Pegs | Optional |
| Valve Caps | Box One – Blue Anodized |
| Detangler | Snafu |
| Gyro Plate | Snafu |

Skyway T/A-20 – Candy Chrome Red – Blue Mags (2022)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are very hard Frames to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Blue Skyway Tuff Wheels and Bear Trap Pedals.
This Bike has SOLD!
.
.
.
[gallery ids="2866,2867,2874,2868,2869,2872,2870,2871,2873"]
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler Stem |
| Handle Bars | HARO Baseline |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108 mm V Brakes |
| Brake Pads | Kool Stop |
| Brake Lever | Box Brand |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Chrome Straight Post (25.4) |
| Wheels | Skyway Tuff Wheels |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Valve Caps | Insight Red Anodized |
| Headset Top Cap | Red Anodized |
| Pad Set | Skyway |

PK Ripper – Baby Blue & Gold (2021)
This bike started life as a 2021 Vans Limited Edition that was custom painted SE Racing Baby Blue by Autokraft Restorations. Autokraft is a high end Muscle Car Restoration Shop that I work at. The Frame & Fork were professionally painted in a booth and is every bit as good if not better than the factory paint! Our Painter has been painting for 30 + years! Satisfaction Guaranteed! We then chose to add Gold Components. Some key components on this one are Redline Flight Cranks, Technique F6 Rocket Pod Hubs, Ryno Lite XL Rims and Promax Brakes.
This Bike has SOLD. If this bike is of interest to you we may be able to build one for you. (Depending on current inventory)
.
.
.
[gallery ids="3443,3444,3445,3446,3447,3448"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear - Baby Blue |
| Headset 1 1/8 | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing – Chrome |
| Grips | AME |
| Donuts | SE |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th – Gold |
| B.B. | SE Sealed Bearings |
| Pedals | MKS Graphite |
| Brakes | Pro Max |
| Brake Pads | Pro Max |
| Brake Cable | Pro Max |
| Seat | Dominator |
| Seat Clamp | Pro Max |
| Seat Post | Fluted |
| Rims | Rhyno XL Chrome |
| Hubs | Technique F6 Rocket Pod Hubs |
| Spokes/Nipples | Stainless / Gold Alloy Nipples |
| Tires | Tioga Comp II's |
| Tubes | GURU |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Chain Tensioners | Optional |
| Axle Nuts | Technique |
| Valve Caps | Trik Topz – Gold Alloy |
| Pad Set | SE Racing |
| Sticker Set | SE Racing - BMX Products USA |
| Custom Paint | Autokraft Restorations |

PK Ripper – Vans Edition (2021)
This Bike has Sold!
2021 Vans Edition PK Ripper - This one is 100% stock the way they come from SE Racing. Only 1 of these available. 1 of 250 made for the U.S. Market!
.
.
.
[gallery ids="2818,2825,2824,2823,2822,2821,2820,2819"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | "Off the Wall" Landing Gear |
| Headset 1 1/8 | SE Racing – Red Anodized |
| Stem 1 /18” | SE Racing – Black Anodized 55mm (Vans Edition) |
| Handle Bars | SE Racing Cro Moly |
| Grips | Vans X Cult Grips |
| Cranks | SE Racing 3 Piece |
| Sprocket | SE Racing 44 tooth |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 V Brakes |
| Brake Pads | Tektro |
| Brake Cable | Tektro Slick Cable |
| Brake Lever | Tektro 316A - Alloy |
| Seat | SE Racing |
| Seat Clamp | SE Racing Champ Clamp – Red Anodized |
| Seat Post | SE Racing - Fluted |
| Wheels | SE Racing Double Wall with Seal Bearing Mohawk Hubs |
| Tires | Vans X Cult |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Pad Set | Vans "Off the Wall" Checkerboard Edition |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |






