Back to Dream Bikes
PK Ripper (1980’s)
$0.00
1980’s PK Ripper
This bike belonged to a local friend and has already sold!
| Frame | 80’s PK Ripper “Loop Tail” – Serial # PK*7802 |
| Fork | Cro Moly (80’s) – Not Landing Gear Forks |
| Handle Bars | Haro |
| Stem | Generic |
| Headset | Basic – Black Headset |
| Grips | Oakley O-Wings |
| Donuts | |
| Cranks | Takagi Tourney – 170mm |
| Sprocket | Takagi 44th |
| Bottom Brkt | Std Bearing (Tioga)? |
| Spacers | |
| Pedals | KKT Lightning |
| Brakes | Dia Compe MX 1000 ? Weinman? |
| Brake Pads | |
| Brake Cable | |
| Seat | GT (Padded) |
| Seat Post | UNI 7005 Aluminum |
| Seat Clamp | Odyssey |
| Rims | Araya – Chrome Plated |
| Hubs | Gold Sealed Bearing |
| Spokes | |
| Nipples | Gold Alloy |
| Tires | Tioga Comp III’s |
| Tubes | |
| Freewheel | 16th |
| Chain | Sun Tour |
Out of stock
Related products
Skyway T/A-20 – Candy Chrome Red – Black Mags (2022)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are Beautiful Frames and very hard to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Graphite Skyway Tuff Wheels and a Box Brake Lever!
This Bike has SOLD!
.
.
.
[gallery ids="2728,2729,2730,2731,2732,2733"]
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler |
| Handle Bars | HARO Cro Moly |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108mm V Brakes / Box Lever |
| Brake Pads | Kool Stop |
| Brake Cable | Pro Max |
| Seat | MCS “Expert” (Black N Red) |
| Seat Clamp | HARO Baseline |
| Seat Post | MCS 350mm |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Axle Nuts | TNT Alloy – Red |
| Axle Washers | SE Racing |
| Valve Caps | Insight Red Anodized Aluminum |
| Headset Top Cap | FSA |
| Pad Set | Skyway |
PK Ripper – Vans “Euro” Edition – Frame # 500! (2021)
Vans PK Ripper - Frame # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. Frame # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not currently installed) The Front Brake was part of the Euro package, not available on the U.S. models!This Bike Has Sold!
This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Frame Number | 500 |
Haro Master (2018)
2018 Haro Master - Custom Built with the following parts . . . . (This is a high end build featuring Skyway Graphite Mags, Haro Group 1 Cranks and a 40th Anniversary Sprocket that came from Australia)
.
This Bike has SOLD!
.
.
.
.
[gallery ids="3433,3434,3435,3436,3437,3438,3439,3440,3441,3442"]
| Frame | Haro Master – Lineage |
| Fork | Haro |
| Headset | Haro |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Haro Group 1 |
| Sprocket | Bob Haro Redline 40th Anniversary 28th |
| B.B. | Odyssey |
| Pedals | MKS Graphite |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Odyssey |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | MCS Alloy |
| Wheels | Graphite Tuff Wheels |
| Tires | Kenda K841 20 x 2.25 |
| Tubes | GURU |
| Cassette | 9th - Skyway |
| Chain | Izumi – Chrome |
| Chain Tensioners | Built into the Frame |
| Axle Pegs | Optional |
| Valve Caps | Box One – Blue Anodized |
| Detangler | Snafu |
| Gyro Plate | Snafu |
PK Ripper – Vans Edition (2021)
This Bike has Sold!
2021 Vans Edition PK Ripper - This one is 100% stock the way they come from SE Racing. Only 1 of these available. 1 of 250 made for the U.S. Market!
.
.
.
[gallery ids="2818,2825,2824,2823,2822,2821,2820,2819"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | "Off the Wall" Landing Gear |
| Headset 1 1/8 | SE Racing – Red Anodized |
| Stem 1 /18” | SE Racing – Black Anodized 55mm (Vans Edition) |
| Handle Bars | SE Racing Cro Moly |
| Grips | Vans X Cult Grips |
| Cranks | SE Racing 3 Piece |
| Sprocket | SE Racing 44 tooth |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 V Brakes |
| Brake Pads | Tektro |
| Brake Cable | Tektro Slick Cable |
| Brake Lever | Tektro 316A - Alloy |
| Seat | SE Racing |
| Seat Clamp | SE Racing Champ Clamp – Red Anodized |
| Seat Post | SE Racing - Fluted |
| Wheels | SE Racing Double Wall with Seal Bearing Mohawk Hubs |
| Tires | Vans X Cult |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Pad Set | Vans "Off the Wall" Checkerboard Edition |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |