Back to Dream Bikes
2009 Yeti Super X
$0.00
2009 Yeti Super X
The 2009 YETI “Super X” BMX frames were developed for Jared Graves during his 2008 Olympic Run. Only a couple hundred of these frames were produced.
.
I picked this one up in 2025 as a Frame only (NOS). It was made for an employee of YETI and has the Nick Name “Bubba” in place of the traditional Serial Number. This one features Shimano Deore Brakes, Shimano DXR Cranks with Stainless Torx Pinch bolts and Bullseye Pedals.
.
This one is not currently for sale . . . (maybe some day)
.
Out of stock
Related products
Race Inc RA20-R – Blue (2022)
2022 Race Inc 20" BMX Bike with Blue Anodized Components
This Bike has SOLD!
.
.
.
[gallery ids="2710,2711,2714,2712,2713"]
| Frame | Race Inc RA20-R |
| Fork | Race Inc |
| Headset 1 1/8 | Tange DX 4 |
| Stem | SE Racing |
| Handle Bars | Race Inc |
| Grips | AME |
| Cranks | Alloy 3 Piece |
| Sprocket | Alloy 3 Piece |
| B.B. | YST Seal Bearing |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Box 3 - Blue |
| Brake Pads | Box 3 - Blue |
| Brake Cable | Box 3 - Blue |
| Seat | Dominator |
| Seat Clamp | SE Racing |
| Seat Post | Fluted |
| Wheels | SE Racing |
| Freewheel | Box 2 |
| Tires | Comp II's |
| Tubes | Race Inc |
| Chain | Box Two “Nickel” |
| Valve Caps | Blue Alloy |
| Pad Set | Race Inc |
Skyway T/A-20 – Candy Chrome Blue (2022)
This build is based off of the Candy Chrome Blue Skyway Frames that Planet BMX released. These are Beautiful Frames and very hard to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Graphite Skyway Tuff Wheels and 60th Anniversary Skyway Pedals! This one has sold but we have another one "in the works". Call if interested.
This Bike has SOLD. If this bike is of interest to you we may be able to build one for you. (Depending on current inventory)
.
.
.
[gallery ids="2734,2735,2736,2737,2738,2739"]
| Frame | Skyway T/A Pro XL - Candy Chrome Blue |
| Fork | Skyway T/A Pro - Candy Chrome Blue |
| Headset 1 1/8 | HARO Sealed Bearings |
| Stem | HARO Lineage - 52mm |
| Handle Bars | HARO |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks 175mm |
| Sprocket | Neptune 44th |
| B.B.– Euro | MCS |
| Pedals | Skyway 60th Anniversary |
| Brakes | Box 3 Pro |
| Brake Pads | Kool Stop |
| Brake Cable | Box 3 |
| Seat | MCS “Expert” (Black N Blue) |
| Seat Clamp | HARO Baseline |
| Seat Post | MCS 350mm |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Axle Nuts | TNT Alloy – Black |
| Axle Washers | SE Racing |
| Valve Caps | Box Alloy Blue Anodized |
| Headset Top Cap | FSA |
| Pad Set | Skyway |
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! The original wheels and seat will be included in the sale. . . I will pack this bike better than the factory did prior to shipping to the new owner! If you're interested in this bike you can contact me if you have any questions! Just to confirm, You will receive the bike as photographed AND the Factory Wheels as well as the Factory Seat & Seat Post, (Plus the components on the Bike now) That is also the reason it's priced above retail . . . . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
PK Ripper – Black & Red (2021)
2021 PK Ripper Looptail - Custom - Black with Red Anodized parts. (as with any of our bikes we can swap parts if desired) We've kept the cost of this build for our customers that are looking to get into a new bike for less money. Keep in mind the modern day PK Rippers have a longer top tube length (20") making them a bit easier to ride vs the Old School versions!
This Bike has SOLD!
.
.
.
[gallery ids="2929,2930,2931,2932,2933,2934"]
| Frame | 2021 PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing |
| Stem | SE Racing |
| Handle Bars | SE Racing |
| Grips | SE Racing Cult |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | SE Racing Bear Trap Style |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Race Inc – Seal Bearing Hubs |
| Tires | Tioga Comp III's |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Valve Caps | Black Dice Caps |
| Sticker Set | Black PK Ripper |