Back to Dream Bikes
2009 (35th Anniversary) Redline Flight Pro
$1,800.00
This Bike started as a 2009 Redline Flight Pro Frame, Fork & Bars that I purchased off of E-Bay. The Frame, Fork & Bars were media blasted down to bare metal and then wet sanded down to 2000 grit prior to Gloss White Powder Coat. A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Haro Stem & Tiogo Fastr-X Tires. All of the parts are brand new, the Frame & Fork is a 2009 (35th Anniversary) Flight Pro Model. This was Redlines Top Dog in 2009!
.
This Bike has SOLD!
.
| Frame | 2009 Redline Flight Pro XL |
| Fork | 2009 Redline Flight Pro |
| Handle Bars | 2009 Redline Flight Pro |
| Stem | Haro |
| Headset | Haro Integrated |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | SE Racing Disc/Spider 44th |
| Bottom Bracket | S & M – Euro |
| Pedals | SE Racing – X Pedo Low Profile Platform |
| Brakes | Tektro BX 310 V-Brake |
| Brake Lever | Tektro 319AC – 2 Finger Alloy |
| Brake Pads | Box Brake Pads |
| Brake Cable | MCS Lightning Cable |
| Seat | MCS (Padded) |
| Seat Clamp | Promax |
| Seat Post | MCS Micro Adjust |
| Wheels | SE Racing / Black Ops Sealed Hubs |
| Rim Strips | BMX Guru Brand |
| Tires | Tioga FASTRX |
| Tubes | BMX Guru Brand |
| Freewheel | Chrome 16th |
| Chain | Chrome KMC |
| Chain Tensioners | Promax |
| Valve Caps | Box One – Red Anodized |
| Decal Set | Redline ST-20 |
| Powder Coat | Gloss White |
.
Out of stock
Related products
Skyway T/A-20 – White
This build is based off of the Skyway Frames that Planet BMX released. These are very hard Frames to get!! We then installed some really Trick Parts on it including SE Racing Cranks, Aluminum Wheels with Sealed Bearing Hubs and Box Brakes!
| Frame | Skyway T/A Pro XL - White |
| Fork | Skyway T/A Pro - White |
| Headset 1 1/8 | Mission |
| Stem | Race Inc |
| Handle Bars | SE Pro Bars |
| Grips | AME |
| Donuts | Optional |
| Cranks | SE Racing 180mm |
| Sprocket | Neptune |
| B.B.– Euro | MCS |
| Pedals | MKS Graphite |
| Brakes | Box 3 - Red |
| Brake Pads | Odyssey Slic Cable |
| Brake Cable | Box 3 |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Chrome Straight Post (25.4) |
| Wheels | Race Inc - Sealed Bearing Hubs |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru |
| Freewheel | ACS 16th |
| Chain | Haro Baseline |
| Axle Nuts | Chrome |
| Axle Washers | SE Racing (Rear) |
| Valve Caps | Insight Red Anodized |
| Headset Top Cap | Gineyeah |
| Pad Set | Optional |
Skyway T/A-20 – Candy Chrome Red (Blue Mags)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are very hard Frames to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Blue Skyway Tuff Wheels and Bear Trap Pedals.
This Bike has SOLD!
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler Stem |
| Handle Bars | HARO Baseline |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108 mm V Brakes |
| Brake Pads | Kool Stop |
| Brake Lever | Box Brand |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Chrome Straight Post (25.4) |
| Wheels | Skyway Tuff Wheels |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Valve Caps | Insight Red Anodized |
| Headset Top Cap | Red Anodized |
| Pad Set | Skyway |
Perry Kramer (2021 Vans L.E.) Replica Bike
This is a 2021 Vans Limited Edition Bike that we've converted to replicate the 2019 Perry Kramer Model as close as we could! The real bikes are super hard to find and never pop up on E-bay so we decided to build one as close to the original as possible.
This Bike has SOLD!
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | Tange DX4 Aluminum Cups 1-1/8” |
| Stem | SE Racing - Gold Anodized 55mm |
| Handle Bars | SE Racing Power Wing - Chrome |
| Grips | AME Cam Grips |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 44 tooth – Silver |
| B.B. | SE Racing Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | BX 310 V-Brake – Black |
| Brake Pads | Kool Stop Eagle II |
| Brake Lever | Tektro 316A 2 Finger Alloy |
| Seat | Special Edition Kashimax – Made in Japan |
| Seat Clamp | SE Racing Champ Clamp – Gold Anodized |
| Seat Post | SE Retro Fluted Micro Adjust – Black/Silver |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | CST Caesar C1244 |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Axle Washers | Gold Anodized |
| Valve Caps | Trik Topz – Gold Anodized |
| Sticker Set | SE Racing – Gold |
| Pad Set | SE Racing – Black / Gold |
| Custom Paint | Autokraft Restorations |
2021 PK Ripper – Vans “Euro” Edition – Slight Custom Serial # 500!
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total.
It comes with Front Brakes (not shown in the photos) and is the LAST ONE BUILT! Serial # 500
We've installed some Red SE Vee Cub Tires and Red grips because we like the look!
It does come with the Factory Tires and Factory Grips also. Factory Pad Set also included (Not Shown)
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | SE Racing - Red Anodized |
| Stem 1 /18” | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing |
| Grips | SE Racing (Red ones installed for now) |
| Cranks | SE Racing |
| Sprocket | SE Racing |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Box 3 |
| Brake Pads | Box 3 |
| Brake Cable | Tektro |
| Brake Lever | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing |
| Wheels | SE Racing |
| Tires | SE Racing Cub Vee 2.0 - Red |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |
| Serial Number | This is the last one built - # 500! |