Back to Dream Bikes
Skyway T/A-20 – White (2022)
$1,250.00
This build is based off of the Skyway Frames that Planet BMX released. These are very hard Frames to get!! We then installed some really Trick Parts on it including SE Racing Cranks, Aluminum Wheels with Sealed Bearing Hubs and Box Brakes!
| Frame | Skyway T/A Pro XL – White |
| Fork | Skyway T/A Pro – White |
| Headset 1 1/8 | Mission |
| Stem | Race Inc |
| Handle Bars | SE Pro Bars |
| Grips | AME |
| Donuts | Optional |
| Cranks | SE Racing 180mm |
| Sprocket | Neptune |
| B.B.– Euro | MCS |
| Pedals | MKS Graphite |
| Brakes | Box 3 – Red |
| Brake Pads | Odyssey Slic Cable |
| Brake Cable | Box 3 |
| Seat | Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Chrome Straight Post (25.4) |
| Wheels | Race Inc – Sealed Bearing Hubs |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru |
| Freewheel | ACS 16th |
| Chain | Haro Baseline |
| Axle Nuts | Chrome |
| Axle Washers | SE Racing (Rear) |
| Valve Caps | Insight Red Anodized |
| Headset Top Cap | Gineyeah |
| Pad Set | Optional |
.
.
.
Out of stock
Related products
Torker Pro XL (1998)
1998 Torker Pro XL - USA Made
This Bike started as a used ALUMINUM Torker Frame that I purchased off of E-Bay. (These are SUPER hard to Frames to find) The frame was advertised as a 1999 model but after some research I believe it to be a 1998 model. (I'm not 100% sure) A host of high end parts were added to finish off the build . . . Redline Flight Cranks, Skyway Graphite Tuff Wheels & Box Brakes to name a few. All of the parts are brand new however the frame is a 98/99 “Pro XL” model and as mentioned it is “used” and does have some scuffs/scratches but overall it looks great but I do want to stress it is a used Frame! . Disclaimer, I'm not sure how many years Torker made these Aluminum Frames but I don't believe it was many. With that being said I believe this is a 1998 or 1999 model. . Note: As with all of our bikes I am open to some parts swapping to either fit your needs or in some cases lower the overall price! . .| Frame | Torker Pro XL (Aluminum) |
| Fork | Torker Cro Moly |
| Handle Bars | Cro Moly |
| Stem | Torker 6 Bolt |
| Headset | SE Racing |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | SE Racing Spider / Guru Sprocket |
| B.B. & Cups | Redline |
| Pedals | Haro Fusion |
| Brakes | Box Three |
| Brake Pads | Box Three |
| Brake Cable | Box Three |
| Seat | MCS |
| Seat Clamp | Pro Max |
| Seat Post | MCS (26.8) |
| Wheels | Skyway Graphite Tuff Wheels |
| Tires | Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS |
| Chain | Izumi |
| Axle Nuts | TNT Alloy – Gold Anodized |
| Chain Tensioners | Promax |
| Valve Caps | Punisher Gold Alloy |
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. (Not installed during the photo shoot) The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! All of the original parts will be included in the sale. . . I kept ALL of the original packing material and took good photos of where everything goes in the event it does sell someday. If you're interested in this bike you can contact me if you have any questions! Just to confirm, You will receive the bike as photographed AND all of the original components at this price!! . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |
PK Ripper – Red & Black (2021)
This bike started life as a 2021 Vans Limited Edition PK Ripper Looptail. We then chose to add Black & Silver Components in place of the Stock Yellow Components.
This Bike has SOLD!
.
.
.
[gallery ids="3035,3034,3033,3032,3031,3030,3029"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing - Silver |
| Stem | SE Racing - Black |
| Handle Bars | SE Racing - Black |
| Grips | AME |
| Donuts | SE Racing |
| Cranks | SE Racing 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE Racing Sealed Bearings |
| Pedals | Haro Fusion (Alloy) |
| Brakes | Tektro |
| Brake Pads | Tektro |
| Brake Cable | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Retro Donut |
| Seat Post | SE Racing – Fluted |
| Wheels | Skyway Tuff Wheels |
| Hubs | Sealed Bearings |
| Tires | Tioga Comp II's |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC |
| Chain Tensioners | SE Racing - Black Anodized |
| Valve Caps | Red Alloy |
| Pad Set | SE Racing |
| Sticker Set | Black PK Ripper |
PK Ripper – White & Blue (2021)
This bike started life as a 2021 Vans Limited Edition that was custom painted White by Autokraft Restorations. Autokraft is a high end Muscle Car Restoration Shop that I work at. The Frame & Fork were professionally painted in a booth and is every bit as good if not better than the factory paint! Our Painter has been painting for 30 + years! Satisfaction Guaranteed! We then chose to add Blue Components. Some key components on this one are Redline Flight Cranks, Skyway Tuff Wheels with the Sealed Bearing Aluminum Hubs and Box Brakes with a Cook Brothers Lever!
This Bike has SOLD!
.
.
.
[gallery ids="2756,2757,2758,2759,2760"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear – White |
| Headset 1 1/8 | SE Racing – Blue |
| Stem | SE Racing – Blue 55mm |
| Handle Bars | SE Racing – Chrome |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 43th |
| B.B. | Odyssey Sealed / Blue Anodized |
| Pedals | MKS Graphite – Blue |
| Brakes | Box 3 - Blue |
| Brake Pads | Kool Stop Eagle II Box III Air Flow |
| Brake Cable | MCS |
| Brake Lever | Cook Brothers |
| Seat | SE Racing – Blue |
| Seat Clamp | SE Racing – Blue |
| Seat Post | SE Racing – Fluted |
| Wheels | Skyway Tuff Wheels – Blue Sealed Brgs |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | KMC S1 Chrome |
| Chain Tensioners | SE Blue Anodized |
| Axle Nuts | TNT Alloy – Blue |
| Valve Caps | Trik Topz – Blue |
| Pad Set | White – Blue SE Racing |
| Sticker Set | SE Racing |
| Custom Paint | Autokraft Restorations |