Back to Dream Bikes
Redline by Kastan RL 20 II (2023)
$0.00
This Kit has SOLD!
Cali Red Frame Set – Serial # 016
Frame, Fork, Handlebars and Number Plate have arrived!!
.
Out of stock
Related products
PK Ripper – Vans “Euro” Edition – Serial # 500! (2021)
Vans PK Ripper - Serial # 500
This is a European Version of the Vans Limited Edition. (Only 250 made for the US market and 250 for the Euro market) 500 Total. This is the LAST ONE BUILT! Serial # 500. (See Photo below of the Serial Number) It comes with Front Brakes also! (Included but not shown in the photos) Note: US Models did not receive the Front Brake. This Bike is Brand New and has never been ridden. It's been assembled for photos but will be packaged BETTER than it was from the factory for shipping to the next owner!| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear / Cro Moly |
| Headset | SE Racing - Red Anodized |
| Stem | SE Racing - Black Anodized 55mm |
| Handle Bars | SE Racing Power Wing |
| Grips | Vans Cult Grips - Waffle Sole Pattern |
| Cranks | SE Racing TSC 180mm |
| Sprocket | SE Racing 44th |
| B.B. | SE 19mm Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 |
| Brake Pads | Tektro |
| Brake Cable | Tektro "Slick Cable" |
| Brake Lever | Tektro 316A 2 Finger |
| Seat | Kashimax |
| Seat Clamp | SE Racing – Red Anodized |
| Seat Post | SE Racing - Micro Adjust - Alloy |
| Wheels | SE Racing - Mohawk Hubs |
| Tires | Vans Cult Tread |
| Tubes | SE Racing |
| Freewheel | SE Racing 16th |
| Chain | KMC Z6 |
| Axle Nuts | Stock |
| Valve Caps | Factory Dice Caps |
| Pad Set | Vans Checkerboard Edition |
| Serial Number | This is the last one built - # 500! |
Skyway T/A-20 – Candy Chrome Red – Black Mags (2022)
This build is based off of the Candy Chrome Red Skyway Frames that Planet BMX released. These are Beautiful Frames and very hard to get!! We then installed some really Trick Parts on it including Redline Flight Cranks, Graphite Skyway Tuff Wheels and a Box Brake Lever!
This Bike has SOLD!
.
.
.
[gallery ids="2728,2729,2730,2731,2732,2733"]
| Frame | Skyway T/A Pro XL - Candy Chrome Red |
| Fork | Skyway T/A Pro - Candy Chrome Red |
| Headset | HARO Sealed Bearings |
| Stem | SE Racing Narler |
| Handle Bars | HARO Cro Moly |
| Grips | AME Unitron |
| Cranks | Redline Flight Cranks |
| Sprocket | Neptune 43th |
| B.B.– Euro | MCS |
| Pedals | Wellgo Bear Traps |
| Brakes | Pro Max 108mm V Brakes / Box Lever |
| Brake Pads | Kool Stop |
| Brake Cable | Pro Max |
| Seat | MCS “Expert” (Black N Red) |
| Seat Clamp | HARO Baseline |
| Seat Post | MCS 350mm |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | Haro – Chrome |
| Axle Nuts | TNT Alloy – Red |
| Axle Washers | SE Racing |
| Valve Caps | Insight Red Anodized Aluminum |
| Headset Top Cap | FSA |
| Pad Set | Skyway |
PK Ripper – Black & Gold (2021)
This bike started life as a 2021 Vans Limited Edition We then chose to add Gold Components. Some key components on this one are Redline Flight Cranks, Skyway Tuff Wheels with Sealed Bearing Hubs, SE Racing Bear Trap Pedals and Pro Max Brakes!
This Bike has Sold!
.
.
.
[gallery ids="2833,2834,2835,2836,2837"]
| Frame | 2021 Vans PK Ripper |
| Fork | Landing Gear |
| Headset | SE Racing – Gold Anodized |
| Stem | SE Racing – Gold Anodized 55mm |
| Handle Bars | SE Racing – Chrome |
| Grips | AME |
| Donuts | Optional |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 43 tooth – Black |
| B.B. | SE Sealed Bearings |
| Pedals | SE Racing Bear Trap |
| Brakes | Pro Max – Gold Anodized |
| Brake Pads | Kool Stop Eagle II |
| Brake Cable | Pro Max |
| Brake Lever | Tektro |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Gold Anodized |
| Seat Post | SE Racing Fluted |
| Wheels | Skyway Tuff Wheels – Sealed Bearing Hubs |
| Tires | Tioga Comp III’s |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Chain Tensioners | SE Gold Anodized |
| Axle Nuts | Stock |
| Valve Caps | Black Dice Caps |
| Sticker Set | SE Racing – Gold |
Perry Kramer Replica Bike (2021)
This is a 2021 Vans Limited Edition Bike that we've converted to replicate the 2019 Perry Kramer Model as close as we could! The real bikes are super hard to find and never pop up on E-bay so we decided to build one as close to the original as possible.
This Bike has SOLD!
.
.
.
[gallery ids="2751,2752,2753,2754,2755"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | Tange DX4 Aluminum Cups 1-1/8” |
| Stem | SE Racing - Gold Anodized 55mm |
| Handle Bars | SE Racing Power Wing - Chrome |
| Grips | AME Cam Grips |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 44 tooth – Silver |
| B.B. | SE Racing Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | BX 310 V-Brake – Black |
| Brake Pads | Kool Stop Eagle II |
| Brake Lever | Tektro 316A 2 Finger Alloy |
| Seat | Special Edition Kashimax – Made in Japan |
| Seat Clamp | SE Racing Champ Clamp – Gold Anodized |
| Seat Post | SE Retro Fluted Micro Adjust – Black/Silver |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | CST Caesar C1244 |
| Tubes | SE Racing |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Axle Washers | Gold Anodized |
| Valve Caps | Trik Topz – Gold Anodized |
| Sticker Set | SE Racing – Gold |
| Pad Set | SE Racing – Black / Gold |
| Custom Paint | Autokraft Restorations |