Shop
Showing 1–12 of 66 results

1 Piece Crank Set (New)
Brand New Chrome Cranks Arm assembly
These were removed from the 20" Race Inc RA20 Bikes Note: We charge the exact amount it costs to ship to your address. I am not one of these companies that profit from Shipping Fee's! Feel free to contact me if you have any questions on our parts or Bikes .
2009 Yeti Super X
2009 Yeti Super X
The 2009 YETI "Super X" BMX frames were developed for Jared Graves during his 2008 Olympic Run. Only a couple hundred of these frames were produced. . I picked this one up in 2025 as a Frame only. It was made for an employee of YETI and has the Nick Name "Bubba" in place of the traditional Serial Number. This one features Shimano Deore Brakes, Shimano DXR Cranks with Stainless Torx Pinch bolts and Bullseye Pedals. . This one is not currently for sale . . . . [gallery ids="3896,3897,3898,3899,3915,3900,3907,3901,3904,3905,3902,3903,3912,3906,3908,3916,3911,3910,3917,3909,3914,3913"]
44th Chain Ring (New)
Brand New 44 tooth Chainring
These are “Take Offs” from the Red 2022 Vans PK Rippers 2 of these available Note: We charge the exact amount it costs to ship to your address. I am not one of these companies that profit from Shipping Fee’s! Feel free to contact me if you have any questions on our parts or Bikes .
44th Sprocket (New)
Brand New 44 tooth Sprocket (Chainring, Spider & Bolts)
These are “Take Offs” from the Red 2022 Vans PK Rippers 2 of these available Note: We charge the exact amount it costs to ship to your address. I am not one of these companies that profit from Shipping Fee’s! Feel free to contact me if you have any questions on our parts or Bikes .
Chainring Spider (New)
Brand New Spider for Chainring
These are “Take Offs” from the Red 2022 Vans PK Rippers 1 of these available Note: We charge the exact amount it costs to ship to your address. I am not one of these companies that profit from Shipping Fee’s! Feel free to contact me if you have any questions on our parts or Bikes .
Diamondback Reactor Pro (1996)
1996 Diamondback Reactor Pro Model
This build is based on the Diamondback Reactor Pro Model with a few "upgrades" such as Box Brakes and Bear Trap Pedals! The Frame & Fork are not 100% perfect, but very nice for their age! . The following parts are Original Diamondback Reactor Parts: (Everything else is Brand New!)- Frame
- Fork
- Stem
- Seat Clamp
Frame | 1996 Reactor Pro |
Fork | 1996 Reactor Pro - Oval Blades |
Headset | Alloy – Sealed Bearings |
Stem | Reactor Team |
Handle Bars | 8” Chromoly |
Grips | AME Unitron |
Cranks | 1 Piece Chromoly – 175mm |
Sprocket | Chainring & Spider |
B.B. | Std Bearings |
Pedals | Bear Trap |
Brakes | Box Three |
Brake Pads | Box Three |
Brake Cable | Box Three |
Brake Lever | Box Three |
Seat | SE Racing Lightning Bolt Seat |
Seat Clamp | Diamondback |
Seat Post | Kalloy 27.0 mm |
Wheels | Araya 7x style w/Sealed Bearing Hubs |
Freewheel | ACS 16th |
Tires | Comp III's |
Tubes | Sunlit |
Chain | Izumi – Chrome |
Axle Washers | Red Anodized |
Valve Caps | Red Anodized Skull Caps |

Diamondback Reactor Pro (1997)
Coming Soon!
1997 Diamondback Reactor Pro Model
This build will be based on the Diamondback Reactor Pro Model with a few “upgrades”. It's almost done but as you can see in the photo we're waiting on Brakes and a Seat! Check back as progress continues . . .Frame | 1997 Reactor Team |
Fork | 1997 Reactor Team – Oval Blades |
Handle Bars | 1997 Reactor Team |
Stem | 1997 Reactor Team |
Headset | Sealed Bearing - Upgrade |
Grips | AME Unitron - Upgrade |
Cranks | GT (Profile Style) - Upgrade |
Sprocket | Guru 43th |
B.B. | Redline / Theory Cups - Upgrade |
Pedals | Diamondback Factory Pedals |
Brakes | Black Ops - Upgrade |
Brake Pads | Black Ops |
Brake Cable | DiaCompe |
Brake Lever | DiaCompe |
Seat | MCS |
Seat Clamp | Diamondback |
Seat Post | 27.0mm |
Wheels | Weinmann 4019 Factory Wheels |
Freewheel | Dicta 16t |
Tires | Genuine Tioga Comp III's |
Tubes | Sunlite |
Chain | KMC S1 |
Axle Washers | SE Racing Alloy – Red Anodized |
Valve Caps | Skull – Red Anodized |

Diamondback Reactor Team (1997)
Coming Soon!
1997 Diamondback Reactor Team Model
This build will be based on the Diamondback Reactor Team Model with just a couple "upgrades". Otherwise this will be pretty "stock" and like new! Check back as progress continues . . . .
GT 50th Anniversary (2022)
50th Anniversary GT
Hand Built Frame & Fork made by Craig Turner son of Legendary GT Founder Gary Turner
Made here in the U.S. - To learn more about there products you can visit there website at GT1972.com
These are hard to get and very limited!!
This Bike has SOLD!
.
.
.
[gallery ids="3466,3467,3468,3469,3470,3471,3472,3473,3474,3475,3476,3477,3478,3479,3480"]
Frame | GT 50th Anniversary Series |
Fork | GT 50th Anniversary Series |
Handle Bars | GT Cro Moly |
Stem | Promax |
Headset | SE Racing |
Grips | SE Racing |
Cranks | GT 3 Piece |
Sprocket | Neptune Spider / MCS Chain Ring |
B.B. & Cups | Pro BMX (Australia) |
Pedals | Tech BMX Classic Round T22 |
Brakes | Box 3 |
Brake Pads | Box 3 |
Brake Cable | MCS |
Seat | Dominator |
Seat Clamp | Dia Compe |
Seat Post | Chrome |
Wheels | SE Racing Sealed Bearing (Mohawk Hubs) |
Tires | Comp II's |
Tubes | BMX Guru Brand |
Freewheel | Chrome 16th |
Chain | Izumi |
Axle Nuts | TNT Alloy – Gold |
Valve Caps | Gold Alloy |

GT equipped 20″ BMX Bike
This Bike has SOLD!
This Bike started as a used Frame, Fork, Bars & Stem that I purchased off of E-Bay. It had already been powder coated and new decals applied. I then added the remainder of the parts to complete what you see here. Everything that is labeled GT is definitely GT however I'm not 100% sure on the Frame?!?! It has GT Decals but I cannot confirm it's a GT. The rest of the parts are actually stamped "GT" and familiar GT components. (Bars, Stem, Fork, Hubs) Overall this bike is basically like new! Priced right with some very sought after GT Parts and ready for a new home!Frame | GT Decals but not 100% sure of the make (Aluminum) |
Fork | GT Stiletto Cro Moly Forks |
Handle Bars | GT 4 Pc Cro Moly |
Stem | GT Piston Stem |
Headset | Tange DX 4 |
Grips | AME |
Cranks | SE Racing 3 Piece |
Chainring | Porkchop 44t |
Spider | Race Inc |
Bolts | Insight |
B.B. & Cups | Redline |
Pedals | Black Ops |
Brakes | Dia Compe |
Brake Lever | Box Three |
Brake Pads | Promax |
Brake Cable | MCS Lightning |
Seat | MCS Padded |
Seat Clamp | SE Racing |
Seat Post | Aluminum |
Rims | Polished Aluminum |
Hubs | GT Mohawk |
Tires | Comp II's |
Tubes | Standard 20” |
Freewheel | ACS 16t |
Chain | KMC S1 – Gold |
Axle Nuts | TNT |
Valve Caps | Aluminum |
Sale!
$1,950.00 Original price was: $1,950.00.$1,750.00Current price is: $1,750.00.
Read more

GT Speed Series “Team” (1998)
This Bike started as a used 1998 GT Speed Series Team Model so there are some original parts that are not 100% "New". The Frame, Fork, Stem and Crank Set are used and do have some scratches due to age. Overall this bike is in great shape as you'll see in the photos and most of the parts are brand new but as mentioned a handful of parts are “used” and do have some scuffs/scratches that didn’t polish out. Overall it looks great but I do want to stress it is a used 1998 Frame, Fork etc . . .
.
This Bike has SOLD!
.
All but 5 of the components are Brand New! (Frame, Fork, Stem, Cranks and Sprocket are Original GT Parts)
.
.
.
.
[gallery ids="3115,3116,3125,3117,3124,3118,3119,3120,3121,3122,3123,3126,3127"]
Frame | 1998 GT Speed Series “Team” |
Fork | GT Cro Moly |
Handle Bars | Race Inc - Cro Moly |
Stem | GT Piston Style |
Headset | SE Racing “Eluder” |
Grips | AME |
Cranks | GT Power Series |
Spider / Chainring | GT |
B.B. & Cups | Brand New |
Pedals | Race Inc |
Brakes | Tektro |
Brake Pads | Box Three |
Brake Cable | Box Three |
Seat | Kashimax Aero Style (SE Racing) |
Seat Clamp | Built In |
Seat Post | Kalloy 26.8 |
Wheels | Race Inc - Sealed Bearing (High Flange Hubs) |
Tires | Comp III’s |
Tubes | BMX Guru Brand |
Freewheel | Box II |
Chain | KMC |
Axle Nuts | Stock |
Valve Caps | Gold Alloy |
Decal Set | 1998 GT Speed Series “Team” (New) |

GT Speed Series “Team” (1998)
1998 GT Speed Series "Team"
. This Bike started as a used 1998 Frame that I purchased off of E-Bay. I then wet sanded the frame and polished it to look like new again. A host of high end parts were added to finish off the build . . . GT Cranks & Cook Brothers Brakes to name a few. All of the parts are brand new, the frame is a 98 Speed Series "Team" model and as mentioned it is "used" and does have some scuffs/scratches that didn't polish out. Overall it looks great but I do want to stress it is a used 1998 Frame! Please Note: 1998 Decal Sets are not currently available so it has the 1997 Decals . . . (It is a 1998 Frame though as confirmed by the Serial #)Frame | 1998 GT Speed Series "Team" |
Fork | GT Cro Moly |
Handle Bars | Shadow Conspiracy Vultus SG |
Stem | Profile |
Headset | SE Racing "Eluder" |
Grips | AME Unitron |
Cranks | GT 3 Piece |
Sprocket | GT Overdrive (OG) |
B.B. & Cups | Stolen Revolver 19mm |
Pedals | X Pedo Low Profile Platform |
Brakes | Cook Brothers |
Brake Pads | Cook Brothers |
Brake Cable | Cook Brothers |
Seat | MCS |
Seat Clamp | Built In |
Seat Post | Kalloy 26.8 |
Wheels | SE Racing Sealed Bearing (Mohawk Hubs) |
Tires | Comp II's |
Tubes | BMX Guru Brand |
Freewheel | ROS |
Chain | Izumi |
Axle Nuts | TNT Alloy – Gold |
Valve Caps | Punisher Gold Alloy |
Decal Set | 1997 GT Speed Series “Team” |