Back to Dream Bikes
Diamondback Reactor Team (1997)
$0.00
Coming Soon!
1997 Diamondback Reactor Team Model
This build will be based on the Diamondback Reactor Team Model with just a couple “upgrades”. Otherwise this will be pretty “stock” and like new!
Check back as progress continues . . .
.
Out of stock
Related products
PK Ripper – White & Blue (2021)
This bike started life as a 2021 Vans Limited Edition that was custom painted White by Autokraft Restorations. Autokraft is a high end Muscle Car Restoration Shop that I work at. The Frame & Fork were professionally painted in a booth and is every bit as good if not better than the factory paint! Our Painter has been painting for 30 + years! Satisfaction Guaranteed! We then chose to add Blue Components. Some key components on this one are Redline Flight Cranks, Skyway Tuff Wheels with the Sealed Bearing Aluminum Hubs and Box Brakes with a Cook Brothers Lever!
This Bike has SOLD!
.
.
.
[gallery ids="2756,2757,2758,2759,2760"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | Landing Gear – White |
| Headset 1 1/8 | SE Racing – Blue |
| Stem | SE Racing – Blue 55mm |
| Handle Bars | SE Racing – Chrome |
| Grips | AME Unitron |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 43th |
| B.B. | Odyssey Sealed / Blue Anodized |
| Pedals | MKS Graphite – Blue |
| Brakes | Box 3 - Blue |
| Brake Pads | Kool Stop Eagle II Box III Air Flow |
| Brake Cable | MCS |
| Brake Lever | Cook Brothers |
| Seat | SE Racing – Blue |
| Seat Clamp | SE Racing – Blue |
| Seat Post | SE Racing – Fluted |
| Wheels | Skyway Tuff Wheels – Blue Sealed Brgs |
| Tires | Snakebelly 20 x 1.75 |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | KMC S1 Chrome |
| Chain Tensioners | SE Blue Anodized |
| Axle Nuts | TNT Alloy – Blue |
| Valve Caps | Trik Topz – Blue |
| Pad Set | White – Blue SE Racing |
| Sticker Set | SE Racing |
| Custom Paint | Autokraft Restorations |
PK Ripper – Black & Gold w/Graphites (2021)
This bike started life as a 2021 Vans Limited Edition We then chose to add Gold Components. Some key components on this one are Redline Flight Cranks, Graphite Skyway Tuff Wheels with Gold Sealed Bearing Hubs, Skyway 60th Anniversary Pedals and Box Brakes! This is a very "High End" build. We could lower the price on this one by swapping out some of the High Components . . .
This Bike has SOLD!
.
.
.
[gallery ids="2740,2741,2742,2743,2744"]
| Frame | 2021 Vans PK Ripper |
| Fork | Landing Gear |
| Headset 1 1/8 | SE Racing - Gold Anodized |
| Stem | SE Racing - Gold Anodized 55mm |
| Handle Bars | SE Racing - Chrome |
| Grips | AME |
| Donuts | SE Racing |
| Cranks | Redline Flight Cranks 180mm |
| Sprocket | Neptune 43 tooth – Black |
| B.B. | SE Sealed Bearings |
| Pedals | Skyway 60th Anniversary Series |
| Brakes | Box 3 - Gold Anodized |
| Brake Pads | Kool Stop Eagle II |
| Brake Cable | Box 3 |
| Brake Lever | Box 3 |
| Seat | SE Racing |
| Seat Clamp | SE Racing – Gold Anodized |
| Seat Post | SE Racing Fluted |
| Wheels | Skyway Tuff Wheels – Graphite |
| Tires | Tioga Comp II's |
| Tubes | BMX Guru Brand |
| Freewheel | ACS 16th |
| Chain | KMC S1 – Gold |
| Chain Tensioners | SE Gold Anodized |
| Axle Nuts | TNT Alloy – Black |
| Valve Caps | Trik Topz – Gold Anodized |
| Sticker Set | SE Racing – Gold |
PK Ripper – Vans Edition (2021)
This Bike has Sold!
2021 Vans Edition PK Ripper - This one is 100% stock the way they come from SE Racing. Only 1 of these available. 1 of 250 made for the U.S. Market!
.
.
.
[gallery ids="2818,2825,2824,2823,2822,2821,2820,2819"]
| Frame | 2021 Vans L.E. PK Ripper |
| Fork | "Off the Wall" Landing Gear |
| Headset 1 1/8 | SE Racing – Red Anodized |
| Stem 1 /18” | SE Racing – Black Anodized 55mm (Vans Edition) |
| Handle Bars | SE Racing Cro Moly |
| Grips | Vans X Cult Grips |
| Cranks | SE Racing 3 Piece |
| Sprocket | SE Racing 44 tooth |
| B.B. | SE Sealed Bearings |
| Pedals | X Pedo Low Profile Platform |
| Brakes | Tektro C-310 V Brakes |
| Brake Pads | Tektro |
| Brake Cable | Tektro Slick Cable |
| Brake Lever | Tektro 316A - Alloy |
| Seat | SE Racing |
| Seat Clamp | SE Racing Champ Clamp – Red Anodized |
| Seat Post | SE Racing - Fluted |
| Wheels | SE Racing Double Wall with Seal Bearing Mohawk Hubs |
| Tires | Vans X Cult |
| Tubes | SE Racing |
| Freewheel | SE Racing |
| Chain | Stock KMC |
| Pad Set | Vans "Off the Wall" Checkerboard Edition |
| Valve Caps | Factory Dice Caps |
| Sticker Set | Factory PK Ripper – Vans Edition |
Haro Master – 40th Anniversary Model (2022)
2022 40th Anniversary Haro Master!
I swapped out a few parts to help this resemble Bob's bike a bit more but I kept all the original parts in there original packaging for the future owner! First I swapped out the Spoke Wheels for the Legendary Skyway Graphite Mags! The original wheels are safely stored for the future owner. I also swapped out the Seat & Seat Post for a Blue Seat which is what you'll see in most of the 80's photos of Bob's bike. Again the stock seat & post were never unwrapped or installed. I also ordered some Blue over Green AME Unitron Grips which will match the bike much better than the Red/Yellow Oakley's. (Not installed during the photo shoot) The Oakley's will be packed with care for the future owner. The last little detail is the Blue Headset Spacer. These were shown on the YouTube video but never made it into production. I ordered a complete Haro Headset just to get the spacer and I believe it looks better as it matches the Blue Seat Post Clamp! This bike isn't currently for sale but if you're really - really interested you can contact me and we'll see if I'm ready to sell it yet. All of the original parts as well as the Haro Sunglasses will be included in the sale at some point . . . I kept ALL of the original packing material and took good photos of where everything goes in the event it does sell someday. If you're interested in this bike you can contact me to see if I'm interested in selling it . . . . I can't keep all of them so it will sell at some point. . .| Frame | Haro Master – 40th Anniversary |
| Fork | Haro |
| Headset | Haro – Ordered a Blue one for the Spacer! |
| Stem | Haro |
| Handle Bars | Haro |
| Grips | Oakley / AME Unitron (Blue over Green) |
| Donuts | N/A |
| Cranks | Haro Group 1 |
| Sprocket | Haro Team Disc - 28th |
| B.B. | Haro |
| Pedals | Haro Fusion |
| Brakes | Dia Compe AD 996's |
| Brake Pads | Dia Compe OPC 12 |
| Brake Cables | Dia Compe |
| Brake Levers | Dia Compe Tech 77 |
| Seat | Haro / Dominator |
| Seat Clamp | Dia Compe |
| Seat Post | Haro / Chrome |
| Wheels | Graphite Tuff Wheels |
| Tires | Haro HP |
| Tubes | Haro |
| Cassette | Skyway |
| Chain | Stock Half Link |
| Chain Tensioners | Haro Built into the Fame |
| Axle Pegs | Haro |
| Valve Caps | Stock |
| Detangler | Stock |
| Gyro Plate | Stock |